Q: Will I Lose Gas If My Gas Cap Is Loose?

asked by on November 23, 2015

Will I lose gas if my gas cap is loose?

Check Engine Light is on Inspection $94.99 - $114.99 Get a Quote

If your gas cap is loose, you will not lose fuel in its liquid form. You will, however, lose fuel in its gaseous state which is called a vapor.

Gasoline absorbs heat and, if left in an open container, will convert from a liquid into a vapor. The fuel vapor escapes into the atmosphere where it mixes with combustion gases in the ozone layer that surrounds our planet and becomes what we know as "smog."

Fuel systems on cars are designed so that all of the fuel vapor is contained within a closed system and cannot escape into the atmosphere. This is done to reduce the amount of smog in the air.

The gas cap is a vital component of your car’s fuel system. It contains a dual-action relief valve that will relieve excess pressure in your fuel tank. It also allows atmospheric pressure into your fuel tank if an excessive vacuum develops.

Vehicles built since 1996 have an emissions monitor test that checks to see if your fuel cap is doing its job. If the leak test fails, the Powertrain Control Module (PCM) will illuminate the Check Engine light and set a diagnostic trouble code for an emissions leak. The most common cause of this is the driver failing to properly reinstall the fuel cap after filling their gas tank. Another cause is a broken rubber seal on the gas cap itself.

If you have a Check Engine Light illuminated, get in touch with a qualified technician. We’ll do our best to diagnose the cause and offer you options for the most reasonable course of repair.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

Car want pick up speed
You are thinking in the right areas for this issue. Even after cleaning the MAF sensor (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-mass-airflow-sensor), it still may require replacement. The catalytic converter (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-catalytic-converter) may be clogged. The transmission could be slipping. If the RPMs go up and...
bad tie rod end
When you say a bad tie rod end, this means that it is loose. This means that it may come off and you would loose steering control. If it is bad enough for you to ask for advice, then you...
I want to replace the cluster panel. Now does the mileage be stored in cluster panel or in computer. I am getting a used panel.
Hi there. Remove the dash panel cover and take out the gauge cluster. Check to see if the odometer is electronic and see if there is a little cover. If there is a cover to the case, then remove the...
Catalytic converter issue?
Hello! It sounds like you may have a clogged catalytic converter or potentially a faulty Oxygen sensor. The catalytic converter converts toxic exhaust gases into less harmful pollutants that are suitable to be expelled into the atmosphere. When this is...
Cvt is shuttering on take off from a stop. Forward and reverse. Is it done for.
Hi there. That is definitely one of the signs that the CVT transmission is having issues. However, without a proper inspection it would be difficult to determine if the transmission assembly is in need of replacement or if there are...
Does a 2011 audi Q5 use tubeless tires? I have a nail lodged in but tire has not deflated
Your vehicle uses tubeless tires. The tire won't deflate if the nail is very tight. That is typical and in fact lots of tires have nails, screws, glass shards and other objects but because these foreign objects can be really...
Shift lever wont go in park or other gears
Hello, thank you for writing in. It is possible the shifter cable or its related components are damaged. They are typically visible from the bottom of the transmission. It should not be hard to inspect that area if you can...
I torqued the axle nut on my 1996 BMW 328i to the spec of an M3 and want to know if I may have damaged the axle in some way.
Hi Marvin. Thanks for contacting us today. The main cause of over-torquing is using an impact or air wrench. However, the majority of damage occurs when the torqued component is in use, develops heat then cools. In your situation, catching...

Related articles

How to Tell the Difference Between LSD and ULSD Fuel
Low Low sulfur diesel (LSD) was replaced with ultra-low sulfur diesel (ULSD) in 2006 as part of an initiative to substantially lower the emissions of particulate matter in diesel (https://www.yourmechanic.com/article/5-essential-things-to-know-about-owning-a-diesel-car) engines. The initiative began in the European Union and later...
How to Replace a Carburetor on Most Cars
A carburetor replacement involves the air cleaner, vacuum hose, car fuel line, and a number of other parts. This complex procedure varies by vehicle.
How to Flush a Fuel Injector
Clean fuel injectors help keep your engine running smoothly and efficiently. Clogged fuel injectors result in reduced fuel economy and loss of power.