Q: While I am driving my car makes a loud knocking sound. I t may be coming from the engine I'm not quite sure.

asked by on February 19, 2017

The engine light isn't on or anything like that, but there Is a loud ticking or knocking sound while I am driving the car. Any idea what this could be?

Car is making a noise Inspection $94.99 - $114.99 Get a Quote

The noise will be identifiable, and the origin pinpointed, if you request a vehicle noise diagnostic. Ticking noises are usually due to valve train problems and, in turn those problems can be caused by low oil pressure. Knocking, if from the engine, can be due to failed bearings. There are some knocking and clunking noises that can arise from suspension or strut faults but those noises are not nearly as persistent and "regular" as engine knocking, or ticking, noises. I encourage you to seek out the diagnostic and then with the mechanic’s advice and explanation, you can decide how best to handle the problem. If you have further questions or concerns, do not hesitate to re-contact YourMechanic as we are always here to help you.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

Tire pressure sensor giving false warnings
Hello, the tire pressure monitoring system (TPMS) is an important system. It has helped reduce blowouts due to low tire pressure. The battery life of a tire pressure sensor (https://www.yourmechanic.com/book/?mktg_jid=226) is estimated to be five years. The battery life is...
Car moving from side-to-side when driving
Hello, I'm not quite sure what you mean that it moves side to side. Being that it is affecting the drivability of the vehicle, it should be inspected and repaired sooner that later. You will probably need the aid of...
Key not working
There are many questions that should be answered before diagnosing this type of question. Does the key not turn the ignition, or does the ignition turn but the engine will not crank, or does the engine crank but with no...
Reverse lights come on when I start the engine
Hello. It is possible that the reverse light wiring is faulty, or that the light bulb sockets are damaged in some way. However, it is more likely that there is an issue with the neutral safety switch (https://www.yourmechanic/com/services/neutral-safety-switch-replacement), and it...
Arcing from distributor to valve cover
The coil is the only thing that is putting out high voltage. The ignition spark will always look for the quickest path to ground. This is the way electricity works. If you are getting spark jumping to the ground before...
Car loses power and stalls/dies if under 2000 RPM
Hello there. There are a few possible problems could be causing your 1999 Nissan 200SX to stall in this manner. The most common would be a MAF sensor (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement), vacuum leak, fuel pump (https://www.yourmechanic.com/services/fuel-pump-replacement), fuel filter (https://www.yourmechanic.com/services/fuel-filter-replacement), alternator (https://www.yourmechanic.com/services/alternator-replacement), battery...
Blinker/turn signal does not flash, I can hear a click in the module, lights up but doesn't blink 2004 Chevrolet Express 2500
Hi there - I would check the turn signal (https://www.yourmechanic.com/article/how-a-car-turn-signal-works) light bulbs and ground connections on the side which is not flashing. Burned out bulbs, shorts and poor ground connections can cause the "no flash" behavior you describe. If the...
how a code p2181 but the temp is normal
Hi there. The code, P2181, stands for Cooling System Performance. This code is meant to give a certified mechanic a starting point to begin their investigation for car problems. In most cases, the code is triggered due to either overheating...
How to replace seat belt chime? 2017 Toyota RAV4 XLE
Hello - there will be a small plastic cube under the dash which is the "beeper" module. Remove an knee pad to access this area, and both by sound and vibration, with the key in the "Run" position (seatbelt unfastened)...

Related articles

Symptoms of a Bad or Failing Cruise Control Vacuum Bleed Switch
Common signs include cruise control disengaging on its own or not disengaging when the pedal is pressed, and a hissing noise coming from the dash.
How Long Does a Horn Switch Last?
With With all of the danger on the roadways, finding a way to keep yourself and your car safe should be a concern. A car has a variety of different mechanisms that are built into it that will allow for...
How to Diagnose and Repair Noisy Brakes
Squeaky car brakes are hard to drive with. If your car brakes are making noise, check the brake pads and brake rotors to see if they are worn down.