Q: When I try starting the veichal it just clicks

asked by on February 25, 2017

When I turn the key to start the veichal it just clicks it don't turn over.i was told it could be the battery so I got a new one it's doing the same thing just clicks when I try to start it is it the starter?

Starter Replacement $169.22 - $1153.49 Get a Quote

What you are describing sounds like a faulty starter solenoid. A faulty starter solenoid will generally produce a clicking sound when turning the key. The starter solenoid is located on the starter and has internal electrical contacts that transmit electricity to the starter. As electricity is supplied to the starter a small gear comes out and engages the flywheel to spin the engine over as you turn the key. When this fails, it may cause a clicking sound and will not allow the starter to engage the flywheel when you turn the key. I would recommend having a professional from YourMechanic come to your location to diagnose and inspect your vehicle.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

How do I delete a paired phone?
If you would like to delete one of the Bluetooth paired phones, you can do so very easily: 1. Turn on the infotainment system. 2. Press the CONFIG button. 3. Use the MENU/SEL knob to select Phone Settings or Bluetooth...
How do I turn on the daytime running lights?
The daytime running lights are low-power lights that can be useful to use during daytime driving, and will automatically adjust depending on how dark it is outside. To turn them on, rotate the light switch (located on the turn signal...
Car won't charge
Hello! Since you have replaced the battery, we will put that to the side, but we cannot ignore it. A failed charging system puts a large load on a battery and can damage a new one, so I suggest having...
Warning lights after ABS brake flex lines replaced
The rear lights, including the brake lights, all go through the light control module and should have nothing to do with the ABS system. You may have bad bulbs (https://www.yourmechanic.com/services/brake-light-bulb-replacement). Have them checked to see if one or more brake...
What does the 15% next to my oil light mean?
Hi, thanks for writing in. I'd be happy to help. This is telling you (https://www.yourmechanic.com/article/understanding-honda-s-maintenance-minder-system-and-service-codes-by-brent-minderler) that your car has 15% life on the oil left, before it is recommended to change it. Make sure the person that changes the oil...
My temperature gauge keeps making it look like my car is overheating the temperature gauge moves up to the red. I already changed the thermometer
Hey there. Your cooling system consists of several components. Thermostat, radiator, heater core, and water pump are just a few. Since the thermostat has been replaced, it is more than likely not the cause of the engine running hot. If...
My car is squealing
Hi there. There are a couple of things that can cause the squeal; a loose/worn belt or worn ac clutch. I highly suspect the belt is causing the noise as it receives a load when the ac is turned on....
What if the VSA turns on during startup and doesn't turn off and what I do is I turn off the engine and start again. This time aro
Hi there. If the VSA light is coming on and shutting off but does not come back on until the next start, then this is a normal condition as the light is telling the drive that the VSA system is...

Related articles

P0410 OBD-II Trouble Code: Secondary Air Injection System Malfunction
P0410 code definition Secondary Air Injection System Malfunction What the P0410 code means P0410 is an OBD-II generic code that the engine...
The Guide to Right-of-Way Laws in Delaware
When When you are in traffic, and there are no signals or signs in place to regulate traffic flow, you need to use common sense, and also know the laws regarding right of way. Right-of-way laws in the State of...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one cylinder. A P2428 trouble code is also associated...