Q: Vibration when changing gears.
I feel a vibration when I change gears.
Recommended Services
| Car is shaking or vibrating Inspection | $94.99 - $114.99 | Get a Quote |
Vibration between shifts in an automatic or manual are pretty similar and are usually caused by loose motor or transmission mounts, but could be mimicked by suspension components. Have a mechanic from YourMechanic inspect your vehicle for any looseness in the driveline and make the necessary repairs.
The statements expressed above are only for informational purposes and should be independently verified. Please see our
terms of service
for more details
Get an instant quote for your car
Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing
What others are asking
Opinion on using the Lucas transmission additive as a prevention
For modern cars, a lot of them are pretty particular on what fluid they use. If you just add the fluid in the mix, it may not be compatible with the fluid that's in your transmission. If your transmission is...
Service tire monitor warning, tire pressure a bit high
This is likely due to the fact that the person who changed your tires may have broken your TPMS sensor in that particular wheel. If the pressure sensor is not giving a signal at all, this would mean that the...
Door ajar warning on, interior lights on - 2014 BMW X1
Hello. The body control module (BCM) controls the interior lights for this vehicle. The BCM gets inputs for the interior lights to come on by any one of the door switches or the interior light switch. If any one of...
knocking and loud engine sound and poor acceleration.
Hello there, many faults will cause your 1994 Mercedes-Benz E320 to have a knocking sound and smoke. The most common is low oil level, spark plugs, fuel pump, plug wires, low oil pressure, piston rings, or engine mechanical damage. This...
My truck shakes when I accelerate
This may be related to a faulty throttle position sensor or potentially a dirty or failing mass air flow sensor (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement). The mass air flow sensor is a unit in the intake system that monitors air intake as it is...
Service engine soon. Light not blinking. Diagnostics engine head radiator hot. I see no problems no overheating?
Hello. Thank you for writing in. It would be beneficial to have the diagnostic codes (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection) that were pulled from the scan. Have you checked the level of the coolant? You should start there. Make sure that the thermostat is...
No heat coming out of vents?
Hi There, The leak coming from the cracked thermostat housing may have caused an excessive amount of coolant to be leaked out of the system which impacts the functionality of the heater core. The [heater core]((https://www.yourmechanic.com/services/heater-is-not-working-inspection) is a small radiator...
Engine occasionally cuts out while idling at a stoplight and occasionally hesitates and bucks upon acceleration.
There is a issue with the fuel delivery to your engine. It seems as the fuel pump may be failing. Check the fuel pressure on the fuel rail and see if there is at least 30 psi. If the fuel...
Theft deterrent Light on but car starts but unable to control windows or unlock door.
Claimed by Jeff Engstrom
Related articles
How Often Do I Need to Replace the Transmission Fluid?
The basic definition of a transmission is the part of a vehicle that transfers the power from the engine to the wheels. How...
Maintenance Minder and Service Codes For Acura Cars
Acura scheduled maintenance is tracked by the Acura Maintenance Minder system. Main codes A and B combine with sub codes for exact service, like A1.
How to Replace a Transmission Position Sensor (Switch)
Transmission position sensors (TPS) switch ensures a car is in Neutral or Park when started and shuts the car down if it's not in the right gear.
Browse other content
Maintenance
Services
Estimates