Q: Using cheaper oil

asked by on January 18, 2017

Can I use conventional motor oil instead of synthetic oil in a nissan altima with no issues with the car

Change Oil and Filter $103.58 - $181.08 Get a Quote

If your Altima is model year 2013 or later, synthetic oil is recommended by Nissan. However, according to Nissan, you can still use conventional mineral oil, regardless of model year, so long as the conventional oil meets the required API certification and is of the right viscosity for your climate. Nissan recommends synthetic oil because such oil has drastically fewer contaminants than refined mineral oil and synthetic oil can resist much higher operating temperatures without oxidizing and breaking down. Synthetics also have much better flow characteristics in cold weather which reduces engine wear and could reduce vehicle fuel consumption. On this topic, as you probably know, YourMechanic does offer mobile oil and filter changes. If you desire that service, please request an oil/filter change and the responding certified mechanic will perform that for you right at your location. If you have further questions or concerns, do not hesitate to re-contact YourMechanic as we are always here to help you.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

Roof hydraulics leaking
There are no problems that stand out on this car for your hydraulic leak; the entire convertible top system would need to be inspected to see if one of the cylinders, lines, or pumps are leaking on your car. I...
Codes P0171 and P0174
Codes P0171 (https://www.yourmechanic.com/article/p0171-obd-ii-trouble-code-system-too-lean-bank-1-by-andrew-quinn) and P0174 (https://www.yourmechanic.com/article/p0174-obd-ii-trouble-code-system-too-lean-bank-2-by-blake-griffin) pertain to the engine running lean on both bank one, and bank two, meaning that both sides, or the complete engine, is running lean. The lean condition could be one of several possible causes....
Shift knob gets stuck in gears
The shifter knob shift mechanism (https://www.yourmechanic.com/services/shifter-interlock-solenoid-replacement) may be loosing contact and needs to be replaced. The switch will need to be tested and monitored using the Mercedes scanner. If the switch gives erratic readings when scanned and while the switch...
engine misfire on running temperature
This sounds like you may have potentially two unrelated problems. The first may be related to the issue of timing causing the misfiring, and the second could be related to the fan running more than usual. First, the misfiring issue...
My car is overheating and I would like to pinpoint the cause.
Great description of the problem - your observations helped eliminate the issues it could possibly have. From what you've described, you may have a clogged heater core. Fix and flush your system (https://www.yourmechanic.com/services/cooling-system-flush). While flushing the system, make sure you...
Car won't crank or start with ignition - Audi A3
Hi there. From the description you have given, the problem of your vehicle not cranking with the key and gear indicator (P) flashing. This leads me to believe, there is a problem with the transmission position sensor (https://www.yourmechanic.com/services/transmission-position-sensor-switch-replacement). Not recognizing...
car will not pass e-check.
N/A usually means the monitor isn't available on your year make and model vehicle. An emissions monitor should pass or fail or show ready and not ready after the drive cycle has been complete. In most cases, all drive cycles...
Car shuts off and won't start 2007 Chrysler PT Cruiser
Hi there - first task is to check for problem codes, whether the Check Engine light is illuminated or not. This "stall, no start" behavior (https://www.yourmechanic.com/article/what-causes-a-car-to-stall) could be a failed fuel pump - check the fuse and relay - since...
Can/should passenger side airbags ever deploy without having driver airbags deploy?
I believe that if the passenger air bag deploys the driver side air bag should also deploy. If the air bag that deployed was a passenger 'side' air bag (meaning an airbag located in the seat as opposed to the...

Related articles

How to Read a Motor Oil Label
Read an oil label to know the right type of oil to use in your car. Some new engines require synthetic oil, while older engines use conventional oil.
The Best Used Cars to Buy If You're an Uber or Lyft Driver
Are Are you thinking of becoming a driver for Uber or Lyft? That could be an exciting career change – you’ll get to meet a lot of interesting people, and if you love to drive, what better way to spend...
Industry News for Automotive Techs: November 5 - November 11
Tesla buys Grohmann Engineering, Ferrari's future hybrids, next-gen Dodge Charger and Challenger, Nissan e-Power system, and YourMechanic recognition.