Acting lien it’s going to stall. No power until RPMs go u...


Acting lien it’s going to stall. No power until RPMs go up. If I can get them to go up. Thew a check engine light a couple months ago that I had a vacuum leak at the intake manifold Mechanic's Assistant: Is the power loss ...

Acting lien it’s going to stall. No power until RPMs go up. If I can get them to go up. Thew a check engine light a couple months ago that I had a vacuum leak at the intake manifold Mechanic's Assistant: Is the power loss consistent, or does it fluctuate? Constant at low rpm. If idling Mechanic's Assistant: What is the make/model/year of your car? 3 wpp 2007 satuen vue 2.2 Mechanic's Assistant: Are you fixing your Vue yourself? What have you tried so far? Nothing. I don’t know if I can fix it myself. Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? Just started doing it today

Automotive Expert
Welcome to JustAnswer. Thank you for contacting us for assistance with your vehicle. I'm Pete. I will be happy to assist you with your question. May I ask to whom I have the pleasure of speaking with today?

Tiffany
Automotive Expert
Hello Tiffany. Nice to hear from you today! I'm sorry to hear you are having this problem. I know this can be frustrating. Have you had the fault codes re-checked in your engine computer using a fully compatible scan tool plugged into your vehicle to see if any new codes are coming up with this issue at all?

Nor since it started acting up. I had my check engine light come on and off 3 days after I bought it and it says it was a vacuum leak at the intake manifoldP0171I'm afraid to drive it
Automotive Expert
Thank you for your reply and that information as this does help me better understand the situation. Please give me one moment to type out some info for you. I’ll be right back! Thank you for holding Tiffany! The code P0171 indicates the engine is running lean. I recommend having the fault codes re-checked to see if any new codes are coming up. If it is just the lean code coming up, that can cause this issue to occur. The lean code can be caused by a vacuum leak needing to be repaired or an issue with a weak fuel pump or injectors that are operating incorrectly. Those will all need to be checked into to help identify the component that is at fault so that component can then be repaired to resolve this issue. If it is not running properly and you're afraid to drive it then I recommend locating a mobile mechanic that can come out to you to check this for you or to have it towed to a shop or dealer so they can look into this issue for you to locate the problem to repair it correctly.

Ok. I was hoping to not have to tow it. I don't want to break it. Lol
Automotive Expert
Unfortunately with it running lean those components mentioned above in my last reply have to be checked into to identify the fault properly so it can then be repaired. Running the engine too long in a lean condition can sometimes damage the engine internally. I wish I had some better news to give you on this.

Ok. Well thank you.I have to figure out what I'm going to do. Mobile mechanics are expensive
Automotive Expert
Your welcome! Glad I could be of some help! I hope everything works out well for you! If there are any additional questions on this issue that should arise, please feel free to reply and ask! Have a great day. Thank you for choosing Just Answer for your questions!

Thank you.
Automotive Expert
You're most welcome!

What others are asking

Car squeaks when going over bumps.
I would start by having your suspension system inspected by a YourMechanic technician. It is possible that one of your ball joints or tie rods had dried up. The technician will use an automotive stethoscope to find the source of...
Check Engine light still on after speedometer fix.
Hi there. The most common cause of the speedometer quitting and the Check Engine Light coming on is the vehicle speed sensor. This sensor is located on the transmission and sends a speed signal to the computer to allow the...
Stalling while driving
Sounds like a bad ground connection between the engine/alternator and the chassis. Have a professional mechanic check/clean these connections, and check for other issues like a loose wire in the power distribution circuitry. The car has a fair amount of...
Blown engine
In the 2007 model year the Ford Fusion was available with a 3.0L 6 cylinder motor or a 2.0L 4 cylinder motor. In 2011, the Fusion was available with those same options as well as the 3.5L 6 cylinder dual...
2011 Scion XB ECM replacement cost.
Hi there. The time to replace an ECM (Engine Control Module) on a 2011 Scion xB with a L4-2.4L engine is around 1 to 2 hours not including programming the ECM. ____________________________________________ Billing question was sent to CS for the...
2011 Malibu starts and dies right away.
Hi there. It sounds like you have a fuel pump failing. What may be happening is the fuel pump runs for a few minutes, heats up, then shuts down. I've experienced this same condition in my history. I suggest having...
When I drive my car, I hear a sound like something is rattling under my 2014 Hyundai Elantra
Hi there. If the noise only occurs when moving and it changes when you turn then it is one of a few things. Most of the time this is caused by a loose exhaust heat shield. I have seen these...
My forester recently threw a p0028 code. Replaced the intake solenoid and oil pressure switch but the idle is still rough.
If you used thicker oil than vehicle specified then this can cause problems with the intake variable valve lift system. If you used the wrong oi then change oil and filter again with the proper viscosity oil. If the correct...
2003 mazda 6 wont rev past 3000 rpm has check engine light on mass air flow sensor has been replaced
You did not mention if your rpms are limited when driving forward gears? If you are trying to rev up the engine in park, neutral or reverse the computer will limit the rpms the engine will go and the limiter...