2003 saturn ion 2.2 changed starter and alternator and ha...


2003 saturn ion 2.2 changed starter and alternator and have a fully charged battery. Why won't my car turn over? ...

2003 saturn ion 2.2 changed starter and alternator and have a fully charged battery. Why won't my car turn over?


Also checked fuses and relays
Automotive Expert
Welcome to JustAnswer Mechanical Support! I amCustomerand I will be Investigating and Supporting your question today. I understand it can be really frustrating when your auto is not working an expected but don't worry as I am here to help! I may need further information, however, if required I will let you know! Sorry to hear your having issues with your vehicle I will try to assist you. Looking at the information you have provided It is possible a faulty ignition switch or a bad wiring to the starter motor or a bad connection at the terminals on the starter motor you need to check first if your getting a main supply fixed 12 volt on the main starter motor terminal and then a 12 volt supply on the solenoid terminal on the starter motor when cranking this will indicate if the wiring is correct to the starter motor and trace the wiring back to the ignition switch.

What others are asking

Why Do Side View Mirrors Say That Objects Are Closer Than They Appear?
The right hand side view mirror is a convex mirror (https://www.yourmechanic.com/article/why-are-objects-in-the-mirror-closer-than-they-appear). It gives you that "fish eye" view instead of a more natural flat reflection. Convex mirrors offer you a wider field of vision than regular mirrors, but they have...
How do I use the sun visors?
Your car’s sun visors provide important protection for your eyes from bright light and glare. They’re particularly useful when you’re driving shortly before sunset or after dawn, when the light from the sun can be blinding. To use your sun...
My car cranks but won't start sometimes
This may be caused by a number of things such as leaking fuel injectors or potentially a faulty ignition coil(s). Coils are coated with a varnish-like insulation that becomes brittle over time after being stretched then contracted repeated as the...
RPMs jumps at idle, & sometimes stalls when gas applied after a stop at alight or sign and won't restart for a minute or so
Hello. A stalling issue (https://www.yourmechanic.com/services/car-is-stalling-inspection) like this may take some time to figure out. If you suspect your fuel tank is dirty, you may want to drop it and inspect it. However, these symptoms are more likely to be related...
under the back rear of the car is a large cover. It has several holes and oil is dripping from that area.
Hello. If it is leaking from the holes that I think you are mentioning then these holes are the drain holes for the rear cargo area. This typically means that there is something in that area, probably extra oil that...
Car shaking, Check Engine light on ,brakes are not performed completely,vehicule doesn't take off as easy before 1999 Lexus RX300
Hi there - most likely, your power brake booster has failed (https://www.yourmechanic.com/article/how-to-replace-a-power-brake-booster). This booster uses engine vacuum to provide braking assist. When the brake booster fails, it both allows air into the engine intake that is unmetered by engine management...
The car vibrates when engine running (idling).
Hi there. The engine and transmission mounts need to be replaced. The mounts keep the vehicle from vibrating when the engine is running and is most likely felt at idle. The shocks will no contribute to the vibration as the...
2006 GMC 2500 HD P0101 Mass ari flow sensor (MAF) performance
The powertrain control module (PCM) sends the mass air flow (MAF) sensor a 12-volt reference signal. Incoming air flows over a wire inside the MAF, which allows it to measure intake air temperature, and therefore air density. The MAF then...
is it possible to replace the a/c clutch and bearing on a mazda protege 5 without replacing the compressor
On almost all A/C compressors, it is possible to replace the clutch without replacing the entire unit. To replace the clutch requires a special tool kit for doing just that. The A/C compressor does have to be removed from the...