Q: Rear tire bent

Getting a nail or other foreign object stuck in your tire (https://www.yourmechanic.com/article/is-it-safe-to-drive-with-a-nail-in-my-tire) can be irritating. Most of the time we do not notice that a puncture has occurred until we come out to the vehicle and the tire is flat....

Based on your description, it sounds like your parking brake may be locking up on your rear brakes. I would recommend having your rear brakes disassembled and, using the special tool you referred to, try to compress the caliper. If...

This sounds like it could be a faulty crankshaft sensor (https://www.yourmechanic.com/services/crankshaft-position-sensor-replacement) or a camshaft sensor (https://www.yourmechanic.com/services/camshaft-position-sensor-replacement). These engines had problems with both. The hard start and the backfire (https://www.yourmechanic.com/services/engine-is-backfiring-inspection) may be the camshaft sensor. The stall and no start condition...

Hi there. The recommendations to replace these parts may be a sales ploy to make some money from you since the dealer has to do this piston work under warranty for you. If you have an engine issue after they...

Hello there, many common faults will cause your 2008 Toyota Yaris to crank but not start. The most likely is the battery (https://www.yourmechanic.com/services/battery-replacement), fuel pump (https://www.yourmechanic.com/services/fuel-pump-replacement), battery terminals (https://www.yourmechanic.com/services/battery-terminal-ends-replacement), starter (https://www.yourmechanic.com/services/starter-replacement), battery cables (https://www.yourmechanic.com/services/battery-cable-replacement), ignition switch (https://www.yourmechanic.com/services/ignition-switch-replacement), or a wiring...

Hi There, This can happen for many different reasons. The check engine light will come on when any of the following issues are detected by your vehicle's computer. Shaking or vibration (https://www.yourmechanic.com/services/engine-is-shaking-pulsating-or-vibrating-inspection) may be caused by things such as faulty...

The 1996 Lexus ES300 used a Type A541E transmission while the 2000 model year used a Type U140E. The two transmissions are completely different. If you are looking for a transmission for your 2000 Lexus, simply go to Car-Part.com (http://www.car-part.com)...

If the clutch is slipping while "released" (engaged with the flywheel), the clutch friction material must be replaced as well as possibly other components such as the pressure plate, throw out bearing and other components. In addition, the flywheel has...

Hi Lazaro. Thanks for contacting us tonight. There is a procedure for testing the ignition coils, but we can't post that here - as it's listed in the service and repair manual for your vehicle, with imagery that really helps...