Q: not central locking. why?
its door is not opening fast
My car has 1230 miles.
My car has an automatic transmission.
Hello and thank you for contacting YourMechanic. You can determine which doors are unlocked through the central locking system in the MMI. When operating the MMI, select the ’Car’ function button then select ’Systems’ the select ’Central Locking’. You can then determine which doors should be unlocked when you unlock the vehicle with the remote control. If you need further assistance with setting up the car central locking system, then seek out a professional, such as one from Your Mechanic, to help you with your vehicle.
The statements expressed above are only for informational purposes and should be independently verified. Please see our
terms of service
for more details
Get an instant quote for your car
Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing
What others are asking
How do I view the average fuel economy?
The average fuel economy shows you the gas mileage that your vehicle has been averaging. The average fuel economy is directly tied to the trip meters, and will be reset when the trip meter is reset. To view the average...
Check engine light and P0139 code on a 2006 Hyundai Coupe
You've got to realize that those things often pretty much weld themselves in. From the difference in the metal and the sensor, and the metal and the exhaust. I use special sockets that fit on them, which anybody can buy....
Check engine light refuses to go off after engine replaced
Hello there, you have a long series of issues going on with your 2013 Hyundai Sonata. If you keep getting a repeating oil light on than there is likely a fault in that system. Since this fault has lasted after...
I put a penny in place of a fuse, tried to start my car and now it wont start and makes a grinding sound when i try to start it
Hi there. Putting a penny in place of a fuse, not recommended, replace with the correct fuse (https://www.yourmechanic.com/services/fuse-replacement). The fuse is there, to protect the circuit. If the fuse blows (https://www.yourmechanic.com/services/electric-problems-inspection), there is a short to ground. The grinding sound,...
Do you have to have a Catalytic converter on your vehicle in Indiana?
Short answer id Yes you have to have one on this vehicle. The longer answer is that your vehicle falls under the Federal Emissions Standard for the 2001 year. The vehicle has to meet the Federal standards and Indiana can...
Periodically vehicle runs rough at idle.
Hi there. Most of the codes that are coming on are for a misfire on cylinder number 3. Check the spark plug and wire on cylinder 3 and see if you are getting a good spark. Then check the fuel...
Hello, I have a 2012 jeep compass with engine noise. I inspected it, and it looks to be coming from a pulley. The Crankshaft pulle
There should be no appreciable run-out on the crank pulley and if a physical inspection of the harmonic balancer reveals damage such as a broken, cracked or separated rubber bond, the balancer should be replaced. If you do have a...
I had both axles replaced and car still sqeaks alot what could the problem
Hello, thank you for writing in. The vehicle may be squeaking for a number of reasons. The best way to tell if it is the axles causing the sounds is to isolate the noise with a series of tests. You...
Shifter lever will not move
The clutch must be functioning to shift the gears, that is you must be able to activate the release lever (hydraulically in your case) to disengage the pressure plate, and thence friction material, from the flywheel. Once you are able...
Related articles
5 Common Reasons Why Your Car Door Isn’t Locking Properly
Are your power locks keeping you from getting into your car, or locking it when you leave? You need to know what’s...
The Best Used Cars to Buy If You Live in a Cold Climate
If If you live in a cold climate, likely one of your biggest concerns when you are considering which used vehicle you should buy is how well it will perform in snowy, icy conditions. We have evaluated a number of...
Symptoms of a Bad or Failing Hatch Lock Cylinder
Common signs include the hatch lock cylinder just spinning or not turning at all when you insert the key, and the key not even being able to go in.
Browse other content
Maintenance
Cities
Estimates