Q: My opel corsa engine dies.

asked by on November 18, 2016

My opel corsa single cab starts but as soon as you give it gass it dies.....we did a service 2 weeks ago

My car has 190000 miles.
My car has a manual transmission.

Hi there. Proper diagnoses needs to be performed, as any number of components could be at fault causing the engine to stall as you accelerate. A faulty MAF (mass airflow) sensor incorrectly calculating the incoming air to the engine. A faulty TPS (throttle position sensor) incorrectly providing throttle position information to the ECM (engine control module)/computer. Assuming, the check engine light is not on, leads me to believe, the ECM is not recognizing the fault. A low fuel pressure situation created by a faulty fuel pump or faulty fuel pressure regulator could result in a stall. There are several other possibilities. I recommend having your vehicle’s stalls upon acceleration be diagnosed and repaired by a certified technician, such as one from YourMechanic.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

Car made a noise and then died.
Unfortunately that sound you were hearing may have been your timing belt. The belt may have been frayed and making a noise by rubbing the plastic timing cover under your hood. I believe the noise got louder because the belt...
Loud metal sounding noise at 20 mph then again at 40-50 mph.
It's great that you are trying to be your own detective! This information is very helpful for a mechanic who isn't there to hear the noise. My first thought after seeing the specific speeds was that this noise is transmission...
Opinion of Toyota Camry with a 2.4-liter engine
People say they burn oil, but in my experience only if you don't take care of the engine and change the oil enough. The problem with that is the Toyota has come up with the longer oil change. They say...
The transmission keeps dropping out of overdrive.
Hi there. If the transmission is coming out of overdrive and back into overdrive, either the downshift solenoid has an internal leak or there is an internal issue with the transmission overdrive clutch. Check the downshift solenoid and see if...
Steering wheel groans/sputters on turns
Hello, thank you for writing in. The previous tech who examined the vehicle may be correct, but it is impossible to verify that without the vehicle in front of us. The steering column can cause these symptoms, but so can...
2008 Ford F150 5.4l Crank but won't start after losinng oil pressure due to incident with oil change
Hi there. Anytime you have an excessive oil pressure issue, it's common for the ECU to store an error code that disables the ignition system to prevent internal damage to seals, gaskets or the engine components themselves. It is quite...
Code b212d
B-series codes relate to body control system fault(s), examples of which are door locks, seat controls, airbags and so forth. Such a code will not prevent the car from starting. If your vehicle is not starting (no crank at all)...
Security light flashes rapidly trying to start truck everything comes on but it won't start
You may still be in lockout and the security system is keeping you from starting the car. When the car was entered without the key, it no doubt triggered the immobilizer and that will have to be reset. It's might...
Cylinder Misfire, coil and gasket replacement needed
The valve cover gasket that you need is Nissan part no. 13270JA00A. The valve cover itself is part number 13264JA00A. You will need a new PCV valve for the valve cover (118106N202) and a new PCV grommet (118126N200). If the...

Related articles

How Long Does an Air Charge Temperature Sensor Last?
The The air charge temperature sensor, also referred to as the intake air temperature sensor, works to monitor the temperature of the air as it enters your car engine. The engine’s computer has to have this information so it can...
How to Replace a Manifold Temperature Sensor
Signs of a failing manifold temperature sensor include rough idling and a rough running engine, and may result in a failed emissions test.
How to Replace an Exhaust Gas Recirculation (EGR) Temperature Sensor
Exhaust gas recirculation (EGR) temperature sensors monitor the EGR cooler's operation. One is on the exhaust manifold and one is near the EGR valve.