I have a 2006 Mercedes Benz c350 with p0016 and p0017 cod...
Responses
Greg
224 days ago
Hi, I'm Greg (Indy-Tech).
Welcome to JustAnswer. I'm reviewing your question now, and will post back with your reply ASAP.
Rgds Greg.
Hi Arther
Please bear with me while I put the information together and type my answer.
This may take a little time, but rest assured, I am on the case,
Just now checking for any related TSB's.
Greg.
Customer
224 days ago
Arthur \*\*\*\*\*\* and the vin # \*\*\*\*\*\*\*\*\*\*9839 mb c350
Greg
224 days ago
Arther this is a known issue and there is also a TSB for this problem which I have attached.
Its also known for the Camshaft Adjustment Solenoid(s) and Timing Chain Idler Gear(M273)
My goal is to provide you with excellent service.
<u>If you need more help, please let me know so l can continue to assist you.</u>
Simply reply back if you require additional information and I will be happy to help with any follow up questions.
I am not done until you are happy.
Kindest regards Greg
Customer
224 days ago
this is a big job to check the timing chain idler gear. Or this could be fixed with camshaft adjustment solenoids. Thanks Arthur
Greg
224 days ago
Big job Arther as the cam and crankshaft sensors are not aligning meaning stretched timing chain or as said above.
Do you want to do this job or will you send it out?
Greg
Customer
224 days ago
Even the car is still running smooth. Starts right up. Timing chain is stretch already? Maybe a dirty oil? Solenods itself. ? Will the car still runs normal even with this codes? Thanks again
Greg
224 days ago
If you have noticed no timing chain slapping at start up or with acceleration or deceleration then check oil level and condition. Low oil pressure dirty oil.
It’s been successful in some cases to do an engine flush and oil with filter change? So if oil is a slight dirty and old do a flush first.
Greg
Still not sure what you need?
Have a certified mobile mechanic diagnose what's wrong with your car, at your home or office.
Top Questions
Trending Topics
What others are asking
How do I change a flat tire?
While we all hope to avoid it, there’s a significant chance that you’ll experience a flat tire in your car while on the road or after parking somewhere. If you do, it’s important that you know how to change the...
Excessive noise from camshaft
The noise you are hearing are probably the lifters. Over time, they will start sticking and will make a ticking noise. I would recommend having a technician come out to inspect the noise (https://www.yourmechanic.com/services/car-is-making-a-noise-inspection) to make sure what the issue...
Engine running rough
Quite a few things can account for an engine running rough. It could be just one cylinder misfiring, or multiple. If the Check Engine Light is on, the computer has detected a problem and the code(s) will help narrow it...
My 2003 dodge neon suddely died while driving...Everything works except that it wont start
Whether or not your engine is an "interference engine" depends on which one your car has. The Neon was available with both a 2.0 ltr. and 2.4 ltr. Whether in SOHC or DOHC (single-overhead-cam or double-overhead-cam) form, the 2.0 ltr....
Car all of a sudden won't reverse .. 2005 Chrysler Sebring
Hello - first task is to check the fluid level in the transmission. If it is low, failure to engage gears could result. If you have lost Reverse only, most likely the reverse primary clutch in the transmission (https://www.yourmechanic.com/article/does-an-automatic-transmission-have-a-clutch), or...
Cranks fine but wont start
There is quite a large number of possible issues that will cause a no start condition (https://www.yourmechanic.com/services/car-is-not-starting-inspection). There could be a bad fuel pump, bad spark plugs, faulty ignition coil, or a failed camshaft, or crankshaft, sensor. Any of which...
My car did not start after recently replacing the battery
Hi there. Although we don't currently have mobile mechanics in BC and can't recommend a service we can offer, there are a few things you might want to have a local mechanic inspect. First, on your Nissan Altima, there is...
Want to know if engine number matches vin
There is an engine serial number stamped on the extreme right lower front of your engine. The exact location of the serial number is depicted in an illustration appearing on page 9-10 (Section 9, page 10) of your vehicle's owner...
My car has had trouble starting for the past 3 months. It cranks but it doesn't turn over in the morning.
There are a number of things that may cause this to happen, however based on what you are describing it sounds like you may have an issue related to maintaining the proper fuel pressure both while starting and sitting at...
Browse other content
Maintenance
Services
I have a 2006 Mercedes Benz c350 with p0016 and p0017 codes Mechanic's Assistant: Just to clarify, what's the exact code? And have you tried to reset it? No Mechanic's Assistant: Are you fixing your C350 yourself?...
I have a 2006 Mercedes Benz c350 with p0016 and p0017 codes Mechanic's Assistant: Just to clarify, what's the exact code? And have you tried to reset it? No Mechanic's Assistant: Are you fixing your C350 yourself? What have you tried so far? Nothing need second opinion Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? Is it still drivable with that code