I have a 2006 jeep commander, and i noticed that I have t...
Responses
Mark
217 days ago
Hello, my name is Mark, welcome to just answer! I will be assisting you with all of your vehicle questions today. I’m really sorry that you’re having this issue and I’m going to help you through it, but please understand that I (respectfully) don't know your skill level or tools you have to assist us to diagnose/repair your vehicle. Also, understand that I can't see, smell, hear or touch the vehicle either, so your patience/understanding is appreciated. I do not know anything about the fees or charge so please if you have any concerns, direct them to customer service. The site will prompt you for a phone call. Ignore the pop-ups. Thank you.
My aim is to give you the best service possible and to help you. If you have any questions or concerns, please don’t hesitate to let me know. Sometimes it may take a moment for me to respond because I may have to look up information about your concern. I appreciate your patience and will provide responses as soon as possible.
So, when you turn the key to the start position, what happens? Does the engine rotate but not start OR does the engine not rotate at all?
Customer
217 days ago
It rotates, it will try to crank up but die out. Then, after maybe 2 more turns it will start. I only have this problem after i have driven the car and stopped a few times.
Mark
217 days ago
Ok thanks, \*\*\*\*\* \*\*\*\*\* does sound like you are missing fuel pressure. So, step one would be to put a fuel pressure gauge on it and see if it fact the fuel pressure does not build right awat. If it doesn't, then I would be testing power and ground circuits to the pump to see whether the pump is getting turned on right away or not. The results of that testing will determine your next steps.
Customer
217 days ago
I already had a new fuel pump and module put in. As well as a new Cat converter
Mark
217 days ago
Yes, I understand that.
Still not sure what you need?
Have a certified mobile mechanic diagnose what's wrong with your car, at your home or office.
Top Questions
Trending Topics
What others are asking
How do I reset the Fuel Used setting?
Fuel Used is one of the many settings that the driver information center (DIC) can display. While on this setting, the DIC will show you how much fuel has been used since the last Fuel Used reset. To reset the...
wont shift into 3rd gear
At this age of the car, you will likely need a transmission rebuild. The bands that wrap abound the planetary gear assembly typically crack. Of course, checking the transmission fluid level (https://www.yourmechanic.com/services/transmission-fluid-service) and condition of the car while running in...
My car is jerking back and forth at high speeds
The first thing that needs to be done is to connect a scanner to the car and retrieve the code. This information will lead a technician down a diagnostic path. There is an important distinction that needs to be made...
Using proximity key, car starts without holding down brake
One possible cause for the problem may have to do with the switch that tells the vehicle that the brake pedal is depressed. The switch may have failed (https://www.yourmechanic.com/services/brake-light-switch-replacement) in a way that continuously tells the system that the brake...
Just looking at 2012 Jetta 2.5 SE wondering about the reliability never owned a vw and maintenance it has 60k for 8k 1 owner what
Hi there. When it comes to buying a vehicle, all vehicles come with a maintenance log. The maintenance needs to be kept up with the vehicle to ensure a safe ride. The Volkswagen Jetta models are dependable and are reliable....
Break light and abs light on
Hi There, It sounds like you may have two separate issues going on here. The ABS control module (https://www.yourmechanic.com/services/abs-light-is-on-inspection) controls the activation of the ABS system based upon inputs from the ABS wheel sensors. When this module is not working...
i was driving my car on the freeway and it started to decelerate then it died could it be the map sensor or throttle position sens
Hello, thank you for writing in. The vehicle may be having issues with the throttle or its position sensor, the MAP senor, the mass airflow sensor, or the idle air control valve. With that being said, you can remove the...
whats the typical cost to replace a rear passenger bushing 2005 galant 4cyl.
There is more than one bushing at the wheel position you are inquiring about. The upper control arm has bushings as well as the lower control arm and the trailing arm assembly. In addition, the sway bar has bushings. The...
High speed acceleration issue
Yes, you do have an old truck, but that doesn't mean it can't run well. If you noticed this problem about the time you replaced the catalyst, it could be that the replacement catalyst is not large enough to breathe...
Browse other content
Maintenance
Cities
I have a 2006 jeep commander, and i noticed that I have turn the key a few times before the car actually starts. I had a mechanic look at it and he told me that i will need a new [fuel pump](/topics-fuel-pump-jeep/). So he put in ...
I have a 2006 jeep commander, and i noticed that I have turn the key a few times before the car actually starts. I had a mechanic look at it and he told me that i will need a new [fuel pump](/topics-fuel-pump-jeep/). So he put in a new fuel pump and module and a new Catilyst converter. it started up with no problem but when I stopped at the gas station and tried to crank the car up again it would not start and I had to do it a couple more times before it would start. Im thinking it could possibly be my starter, What do you think\> Mechanic's Assistant: Is the Jeep in "Park" or "Neutral?" Do you know if your Jeep has a "wheel lock" feature? It is in park Mechanic's Assistant: Are you fixing your Commander yourself? What have you tried so far? I had a mechanic put in a new fuel pump and module and even a new cat converter