Q: Inner tie rod torque spec?? 2007 mercury grand marquis

asked by on January 06, 2018

Inner tie rod torque specs
My car has an automatic transmission.

The inner tie rod is torqued to 74 ft lbs and the outer is torqued to 59 ft lbs.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

Heater stopped working while weather is very cold
Your vehicle has automatic temperature control between the drivers side and the passenger side through use of an infrared sensor that measures the temperature of drivers and passenger seat area and adjusts the output air temperature to maintain and keep...
Car won't charge
Hello! Since you have replaced the battery, we will put that to the side, but we cannot ignore it. A failed charging system puts a large load on a battery and can damage a new one, so I suggest having...
Oil gauge fluttering.
Hello. When this occurs I usually install a manual oil pressure gauge to see if the gauge in the truck is correct. If the engine is new with a new pump then I doubt it is a pump issue. Most...
Why do I constantly need to replace the brake rotors and brake pads?
Hi there. That's a really good question. What reason were you given that the rotors need replacing? What symptoms are you experiencing? If you have a brake vibration, the rotors (https://www.yourmechanic.com/services/brake-rotor-disc-replacement) should have enough thickness after a year, unless you...
Water is dripping at the bottom of my car muffler
If you do not have any problems with the engine getting low on coolant then the water dripping from the muffler is normal condensation dripping from the muffler. Most mufflers have a small drain hole on the bottom low side...
Hazard light staying on
Hello. From what you describe, it would appear that your vehicle may be experiencing issues with the hazard button. If the button is buzzing and causing the lights to malfunction that may be an indicator that it is sticking, or...
"TRAC OFF" light came on after diagnostic test for check engine light
Hello. In most cases the vehicle's traction control system is on a completely separate circuit then that of the engine knock sensor. Therefore most knock sensor faults or issues should have little to no effect on the operation of the...
Replaced 2 camshaft sensors and crankshaft sensor, codes coming back on straight away 2001 Honda Stream
Hi there - you don't specify which codes are being set, which might be helpful. If you're getting codes that the sensor itself is malfunctioning, it is possible to get a new sensor that is bad - not often, but...
Crankshaft bearing replacement cost 2008 BMW M3
Hello - unfortunately, this is not a service YourMechanic offers at this time. Thanks for thinking of us though!

Related articles

A Buyer’s Guide to the 2007 Ford Crown Victoria
This This enduring Ford classic enjoyed a nearly two-decade run before being discontinued from the retail market with the 2007 model-year being the last. Ever-popular with law enforcement (for whom models continued in production through 2011), and senior citizens, the...
Mercury Certified Pre-Owned (CPO) Car Program
Drivers Drivers who are shopping around for a used Mercury vehicle may want to check out cars under their certified pre-owned program. Many manufacturers have a certified pre-owned (CPO) program, and each one is set up differently. Read on to...
Understanding the Mercury Intelligent Oil Life Monitor and Service Indicator Lights
Car symbols, or dashboard lights, are a car service reminder. The Mercury Intelligent Oil Life Monitor indicates when and what service your car needs.