Q: Ignition not turning.
The ignition isn't turning with the key in it. I don't know if it is the key or the ignition switch.
Sometimes the steering wheel is in a bind and will not let you turn the key. Try and move the steering wheel back and forth while turning the key. If this does not work then try a different key if you have one and see if the key was just worn and was the problem. If it still does not turn then the ignition lock would need to be replaced. I recommend you have a qualified mechanic, like one from YourMechanic, check and diagnose the problem for you.
The statements expressed above are only for informational purposes and should be independently verified. Please see our
terms of service
for more details
Get an instant quote for your car
Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing
What others are asking
Transmission slipping, hard to stay in gear
Automatic transmissions have been called “slush boxes” for years by old drag racers. The main reason for this name is they are a fluid driven device. Because of this, fluid level and condition are crucial to proper operation. Unfortunately, the...
Can't insert key into doorlock
There are many small moving parts inside a lock tumbler. There is a tiny door that prevents water and debris from entering easily. As with any moving parts they need occasional lubrication. There are products made specifically for locks, or...
Power steering return hose leaks.
Check the clamps and make sure they are tight. If not, the line may have to be replaced. A Fluid leak like this can come from several different places. The hose can experience high pressure, especially where they meet with...
Car is idling low at less than 1 RPM at a stop
Hi there. This may be a sign of a failing idle air control valve (https://www.yourmechanic.com/services/idle-control-valve-replacement). The idle air control valve is located on or near your intake manifold that monitors the air intake as it is mixed with fuel prior...
Undercoating the car prior to inclement weather?
Hi there. The undercoating you're father is referring to was a very common factory or aftermarket addition in the Northern United States from the mid-1950's up until the late 1990's. It was essentially a polymer spray that protected exposed steel...
Rough idle when in drive..but idle is fine when in nuetral or park
Hi there. Check for vacuum leaks on the engine. A small leak will cause the engine to stumble when the rpm's are low, like in gear on automatic transmissions. Look around the intake manifold for the gaskets being broken. Check...
My acura 2005 tsx won't start
Hi Lemar. Thanks for contacting us today. There are several possible sources, such as a faulty fuel pump, fuel pump relay, mass air flow sensor, throttle body or simple things like a dirty fuel or air filter. The best way...
Received code p0826 on my 2005 Chevy Malibu.
The code is for the cooling system sensor or thermostat and will cause the check engine light to come on. If the light is on then you will fail the emission test.
Related articles
How Car Keypad Locks Work
Pioneered Pioneered by Ford, keypads let you lock, unlock without keys Pioneered by Ford, keypad door systems began appearing on high-end car and SUV products in the early 1980s. Ford took advantage of the then-new digital computer revolution – the...
Symptoms of Bad or Failing Points & Condenser
If your vehicle runs rough, the engine will not fire, or the vehicle will not start at all, the points and condenser system may be failing.
How to Replace an Ignition Lock Cylinder
The ignition lock cylinder is usually at fault if there is an issue with the ignition system. A common sign of failure is a car that won't start.
Browse other content
Maintenance
Services