Q: I have replaced both front end sides completely and I am still hearing a clunk sound . what can it be?

asked by on April 19, 2017

I have replaced the control arms, struts and springs and drive shafts on both sides of the car. But I am still hearing a sound like the cv joints are bad. What can it be?

My car has 136000 miles.
My car has an automatic transmission.

Clunking or knocking noise from wheels Inspection $94.99 - $114.99 Get a Quote

Strut mounts can account for noise like that as well as a loose sway bar. There are tie rod ends and motor mounts to consider as well. If you have any kind of sub-frame structure bolted to the unibody, through insulators, those mounts should be inspected. The bottom line is, based on your description the noise is apparent enough that if you request a vehicle noise diagnostic, the responding certified mechanic will pinpoint the origin of the noise and get this resolved for you. If you have further questions or concerns, do not hesitate to re-contact YourMechanic as we are always here to help you.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

Parts of the engine look moist
In most cases, there shouldn't be any moisture or liquid on your engine. Coolant is not oily, so you could have a coolant leak. You'll want to keep a look out for other symptoms that may be accompanying this symptom....
What happens if my gas cap is loose?
If your gas cap is not tight then the computer will detect a leak and cause the check engine light to come on, or it may illuminate a "check fuel cap" light if your car is equipped with one. You...
Front brakes drag
In order to locate the possible cause of your front brakes dragging, you will need to do some tests to isolate the cause. When you are testing the system brakes dragging the lift and support, check both front wheels to...
Power capabilities
Hi there. The engine will not start to break down or lose power at that point. The factory engine does not make that much power on its own so I have to assume you are talking about aftermarket power modifications....
White plugs due to lean conditions in cumbustion chamber
You should have your fuel injectors (https://www.yourmechanic.com/services/fuel-injector-replacement) and combustion chamber cleaned. The valves may have carbon built up on them and will cause lean conditions. Also dirty clogged injectors can cause lean conditions as well. Lastly, I recommend checking the...
Car cranks slowly when it is hot, but cranks normal when the engine is cold
It sounds like your starter motor could be overheating. If the starter overheats, this can cause it to malfunction. I would recommend having your starter inspected and replaced as necessary by a certified mechanic. Once you have a new starter,...
Installing an external horn because the original horn is not working
Hello. There are several types of aftermarket horns (https://www.yourmechanic.com/article/how-to-replace-a-car-horn-by-mia-bevacqua) that you can purchase and install. There are a few aspects you will want to consider before you look to purchase one. Different styles of horns are designed to have toggles...
Is a used BMW X 6 a smart purchase ?
Any vehicle purchase can be a crap shoot. Vehicles that have a reputation for being unreliable or expensive to maintain can sometimes be as reliable as sunshine while a vehicle with a reputation for reliability can be your worst nightmare....

Related articles

A Buyer’s Guide to the 2012 Chrysler Town & Country
While While the Chrysler Town & Country has been in production for over half a century, the 2012 Chrysler Town & Country is anything but old-fashioned. The model got a huge overhaul in 2011 and saw a few new upgrades...
The Best Used Cars to Buy If You’re a Massage Therapist
If If you're a massage therapist, one of the cornerstones of your business has to be that you don’t keep your clients waiting. That means you need a vehicle that’s reliable. You also will have to move your gear, including...
How Long Do Trailing Arm Bushings Last?
The The trailing arm bushings join the axle and pivot point on the body of the vehicle. They are part of a trailing arm suspension in your vehicle. The front trailing arm consists of bushings. A bolt runs through these...