Q: I have chevy cruze LS limitd 2016 old body style. My stability control light just stays on. Which says service stabilitrack.

asked by on November 24, 2017

I have chevy cruze LS Limited 2016. My stability control light stays on and it has reduced my engine power. It says service stabilitytrack. Also my steering wheel service light stays on as well.

My car has 11334 miles.
My car has an automatic transmission.

Traction Control Light is on Inspection $94.99 - $114.99 Get a Quote

VSC, or Vehicle Stability Control, maximizes traction and help stabilize the vehicle during cornering if the car turns more or less than desired. VSC also assists you in maintaining traction while accelerating on loose or slippery road surfaces. The reason you are seeing the warning light continuously is there is a fault somewhere in the complex sensor system that makes the system work by regulating the engine’s output and selectively applying braking. There are wheel speed sensors, brake pressure modulators, interconnecting wiring and sensors, the control computer and so forth all of which are subject to malfunction. VSC is an essential vehicle safety system and consequently you should definitely have the fault in the system pinpointed and repaired by a professional. The recommended service to do that is a VSC/traction control system diagnostic. If you request that service, the responding certified mechanic will get this taken care of for you promptly. If you have further questions or concerns, do not hesitate to re-contact YourMechanic as we are always here to help you.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

How do I secure a child restraint system with the top tether anchors?
Your vehicle has a top tether anchor system to help work with certain child restraint systems. To use the anchors, run the restraint’s top tether strap over the seatback, but under the headrest (run the strap between the headrest’s legs)....
Plastic key in ignition
Hello, The metal key and plastic housing both need to be intact for the vehicle to start. The plastic housing holds a computer chip which sends a signal to the anti-theft system to start the vehicle. The metal key acts...
Distributor not sparking
If you have verified there is no spark coming out of the distributor, depending on your system, you might have a faulty ignition module. This is located inside the distributor and controls the spark delivery. Wiring diagrams and information on...
Ac & heat only blow out of defroster when I turn the
It sounds like you have a problem with the vacuum supply to the HVAC control head. Engine vacuum is what changes the airflow to the vents and floor. Defrost is the default position when there is not a vacuum source....
Misfire on cylinder 8
It could be the spark plug (https://www.yourmechanic.com/article/symptoms-of-bad-or-failing-spark-plugs), ignition coil (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-ignition-coil), or coil boot causing the misfire. You may also have dirty fuel injectors (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-fuel-injector) that need to be cleaned. Have the ECM scanned to see if the misfire code is...
My brakes on my Jeep are squeaking after I replaced them?
Hello. This will occur if the brakes are not done correctly. When the brakes are done on this vehicle, the drums (https://www.yourmechanic.com/services/brake-drum-replacement) or rotors (https://www.yourmechanic.com/services/brake-rotor-disc-replacement) need to be machined or replaced. If they are not, then the pads will not...
Car stalls when I fully brake after I drive
Hey there. This is a common sign of a failing idle air control valve (https://www.yourmechanic.com/services/idle-control-valve-replacement). The idle air control valve monitors the air intake as it is mixed with fuel prior to being injected into the engine. This valve is...
engine swap 2001 Chrysler PT Cruiser
Yes, the 2001 "B" engine can be bolted up to the 2006 vehicle ("B" engine code also). Caution - you should use the 2001 engine harness and engine controllers for engine management and diagnostic capability. If the 2006 had the...
how do i know if i have an bad PCM
PCM's are usually replaced at the end of a "process of elimination". That is, with most engine management control failures, there are a whole host of common causes that are evaluated first. Once that long list of most common causes...

Related articles

A Buyer’s Guide to the 2012 Chevrolet Impala
A A true classic, the 2012 Chevrolet Impala may not have all of the latest high-tech features of other sedans on the market, but it is a tried-and-true model with lots of room, plenty of comfortable features, and a large...
The Best Used Cars to Buy If You're a Gardener or Landscape Architect
Gardeners Gardeners and landscape architects need to haul around quite a bit of gear. As a gardener, chances are you will need to transport a variety of mowing equipment, along with smaller implements. You may also need to move shrubs,...
How to Buy a Classic Chevy
For experienced car collectors and rookies alike, owning a classic Chevy is a rite of passage. There are multiple decades and styles in which Chevrolet made popular cars. Many of these cars then had a devout following in the years...