Q: I have a small transmission fluid leak and need a flush and bushing replacement on a 2006 Pontiac G6. How much should that cost?

asked by on March 14, 2018

I have a small transmission fluid leak and need a flush and bushing replacement on a 2006 Pontiac G6. How much should that cost?

My car has 114000 miles.
My car has an automatic transmission.

Transmission Fluid Service $140.08 - $502.73 Get a Quote

If the fluid leak is from the transmission oil pan, the leak will be resolved once the transmission fluid and filter is changed. In practice, when the oil pan is re-installed after draining the fluid, a proper pan to transmission seal will be established. If the leak is elsewhere in the transmission, to let you know the cost to repair it, the mechanic will have to see what you have in detail. With regard to the the fluid/filter change, to obtain a written, itemized quote and schedule the service to suit your needs, please refer to YourMechanic’s transmission fluid/filter drain and replacement service. Once you land on the referred page for the fluid/filer service, just click on "Get a Quote". With regard to the bushing, if it is a shift lever/cable bushing, that replacement can be performed by the same mechanic during the fluid change visit. The bushing itself is not particularly costly. If you are referring to a different bushing, please let the mechanic know and the mechanic will perform the necessary repair. If you have further questions or concerns, do not hesitate to re-contact YourMechanic as we are always here to help you.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

How do the side air bags work?
In addition to front air bags, your Accord has side air bags designed to inflate during a moderate or severe impact. Sensors detect the impact and calculate the force, sending that information to the car’s computer. Only one air bag...
Car won't go
If the vehicle is in drive and it will not move, then it may be a serious transmission failure. This is not uncommon on this vehicle. If the shifter feels a little looser than usual, then most of the time...
wont shift into 3rd gear
At this age of the car, you will likely need a transmission rebuild. The bands that wrap abound the planetary gear assembly typically crack. Of course, checking the transmission fluid level (https://www.yourmechanic.com/services/transmission-fluid-service) and condition of the car while running in...
Won't fire
The vehicle uses the crankshaft (https://www.yourmechanic.com/services/crankshaft-position-sensor-replacement) and camshaft sensors (https://www.yourmechanic.com/services/camshaft-position-sensor-replacement) to control the spark and fuel injection of the engine. You should have the computer scanned to get codes, to see which sensor set a code.
Car hesitates and jerks with rising RPM
From the description you have given, you have done a lot of replacing components and still have the problem. It appears you have covered the bases concerning the fuel system. A vacuum leak would affect the idle quality moreso than...
Loud whining noise - 2008 Chevrolet Trailblazer
Hi there. Depending on when the noise occurs I would be able to diagnose this issue better. If the noise occurs right when the engine is started then most of the time it is caused by a failure in the...
2012 Jeep weird sound at front end
Hello. Thanks for writing in. When it comes to strange noises, the best thing to do is locate the exact place its coming from. The first test should be trying to replicate the noise while at idle. If you can...
P0011
Hi there. It sounds like you have a fault in the camshaft position sensor circuit. This fault could be the sensor, the wire harness, the connector, the ECM, or even a mechanical condition. You'll need the manufacturer's specifications for the...
Gas pump continuously shuts off when filling up tank.
The vent hose (https://www.yourmechanic.com/services/surge-tank-hose-replacement) on the fuel tank to the fuel filler neck is plugged up and is not allowing the air (fumes) to cycle through the system as the fuel is being poured. To verify this, the next time...

Related articles

Pontiac Certified Pre-Owned (CPO) Car Program
If If you’re in the market for a used Pontiac vehicle, you may want to check out cars under their certified pre-owned program. Many manufacturers have a certified pre-owned (CPO) program, and each one is set up differently. Read on...
Understanding the Pontiac Oil-Life Monitor and Service Indicator Lights
Car symbols, or dashboard lights, are a car service reminder. The Pontiac Oil Life Monitor (OLM) indicates when and what service your car needs.
How to Buy a Classic Pontiac
Whether you want to buy a classic Pontiac for yourself or as a gift, here are some tips on buying one for a great value.