Q: How do I turn on the hazard lights?

asked by on January 13, 2016

How do I turn on the hazard lights?

The hazard lights are an important safety feature. When the hazards are turned on, all four turn signal lights flash simultaneously, to alert surrounding drivers that there may be an emergency. To turn on the hazard lights, press the Hazard Light button, which is located on the center console. Press the button a second time to turn off the hazards.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

How do I open the trunk?
You can open the trunk in several different ways, such as using your wireless remote control, the key or the trunk opener. Inside the Vehicle Locate the lever on the floor by the door sill, which will have an image...
Wheels aren't moving when turning steering wheel
It sounds as though you damaged the steering rack and pinion gear assembly, along with problems with other components that only a complete and thorough vehicle inspection by a certified specialist can determine. I recommend having a mechanic, such as...
Green light flashing around D4 indicator
When your transmission D4 light is blinking, this means your transmission has stored a code. The code would need to be retrieved and diagnosed to see what the problem is. These transmissions were pretty reliable, but had problems with the...
What would cause acceleration without stepping on the gas while stopped?
It would be hard to pinpoint the exact cause. A couple of possibilities could be a vacuum leak. If the engine is sucking in too much air, it could raise the engine speed, possibly drastically if a ;large vacuum leak...
Blue light flashing under dash.
This blue light may be related to the factory security system or an aftermarket security system. If your vehicle does not have the factory key fob, the light is likely part of the aftermarket security system. If this light is...
The car bogs down and stalls; and has a rough idle until the i tap the upper plenum.
If the problems started after you replaced the PCM, and the first PCM did not have any known issues, you might want to begin your diagnostic by re-installing the original PCM. Seems like you did a lot of work on...
Why would the push rod come out of my slave cylinder on my 2000 Mitsubishi Eclipse
Hello. If the push rod continues to come out of the slave cylinder then you either have an alignment issue with the cylinder, or more commonly it is because the clutch disc or pressure plate have failed. Too much clearance...
Donde esta ubicado el fusible o relay de los fog lights en 2008 Dodge charger SXT
The fog light fuse and relay are usually in the under hood fuse box. If the lights are not working, these components can be tested using a volt ohmmeter. Note that grounding is very important and failure of the lighting...
I have water in my engine oil, is the engine okay?
There's no good spin I can put on this. It's very likely that you've done some damage to your engine. The oil circulation is pretty high, so it's almost certain that the water was stirred up into the oil and...

Related articles

A Buyer’s Guide to the 2012 Mercedes Benz S-Class
If If you’re looking for a vehicle that delivers top-of-the-line features, comfort, performance and safety, all while showing off the prestige of the driver, the 2012 Mercedes Benz S-Class is your choice. Key Features With Active Body Control and a...
A Buyer’s Guide to the 2012 Mazda 3
The The compact car class is definitely a competitive one, with established models like the Toyota Corolla and Honda Civic taking up a lot of the market every year. However, if you’re looking for a really attractive compact sedan or...
How Do I Know If My Brakes Need Replacing?
Certain symptoms tell you when to replace car brakes. The Brake Warning Light and squeaky brakes are common signs of worn out brake pads or rotors.