Q: How do I shift out of P (Park)?

The horn being inoperative could be from either the steering wheel clock spring, or the horn assembly. Both have been known to cause the problem you described. The Check Engine Light could be on for a sensor problem, or a...

Yes, brake pads are no longer made of asbestos based on the possibility of exposure and possible development of mesothelioma. They have been replaced by several different types of material (https://www.yourmechanic.com/article/what-are-brake-pads-made-of). Common materials are organic, metallic, and ceramic. Organic are...

Hi there: To answer your question in one word - NO, it won't pass. Depending on the state you live, the emissions test (https://www.yourmechanic.com/article/how-to-pass-an-emissions-test-by-mark-vallet) will also include a safety inspection that will verify that the electrical system is working correctly....

Hello. A random misfire can be caused by many different things such as dirty fuel injectors (https://www.yourmechanic.com/services/fuel-injector-replacement), a weak fuel pump (https://www.yourmechanic.com/services/fuel-pump-replacement), a bad fuel pressure regulator (https://www.yourmechanic.com/services/fuel-pressure-regulator-replacement), fouled spark plugs (https://www.yourmechanic.com/services/spark-plugs-replacement) or wires (https://www.yourmechanic.com/services/ignition-cable-spark-plug-wires-replacement), a failing ignition coil (https://www.yourmechanic.com/services/ignition-coil-replacement)...

It seems like your issue isn't going to be resolved without the dealership. However, there may be a couple of things we can do to resolve your issue. I will go through a couple of steps and hopefully it will...

Hey there. This noise is an indication of movement of the suspension. The first thing to check would be the lower control bushings on both sides of the car should be checked for movement by supporting the vehicle off the...

When the starter was diagnosed as bad the flywheel teeth the starter mate to when trying to turn over the engine may have broken or worn teeth and cannot engage each other anymore. Why the torque converter would need replaced...

Hi there. The engine could be stumbling for the coil pack or distributor may not be functioning correctly. As the coil pack or distributor gets old, the parts tend to become weak and is not able to send an electrical...

The new module will need to be programmed with the vehicle it is installed on. The vibration is from the anti lock brakes activating when they should not be. You may also have a defective wheel sensor causing the problem...