Q: How do I set or cancel the shift position door unlocking feature?

asked by on January 11, 2016

How do I set or cancel the shift position door unlocking feature?

When the shift position door unlocking feature is turned on, then all of your vehicle’s doors will automatically unlock when the shifter is moved into the P position. You can turn on or turn off this feature with just a few quick steps:

  1. Turn the ignition or the Engine Start Stop switch to the "On" position.

  2. Put the shifter in P.

  3. Press and hold the door unlock button, which is located on the inside of the driver’s door.

  4. Keep the button held until the doors lock and unlock, which will take approximately five seconds.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

Car overheating and not starting
You certainly don't see many Pontiac Torrents around. The 3.4L is a common engine, however, and I know it well. Since it doesn't use a timing belt, I assume you must mean you replaced the serpentine belt. The only way...
Transmission slipping when going uphill
Hi there. Your hybrid has a continuously variable transmission (CVT), which uses internal pulleys and a steel belt. The transmission control module (TCM) controls the shift pulley ratio via solenoids, while receiving inputs from various sensors throughout the vehicle. If...
why does my motor move side to side when the truck is running ??
An engine that moves side to side in the engine bay can be commonly caused by defective motor mounts (https://www.yourmechanic.com/article/how-long-do-engine-motor-mounts-last). If the motor mounts wear out or break, they will not be able to properly secure the motor in the...
My car stopped on the highway said low oil pressure took it to a shop they change the sensor still have the same problem
I believe you have 2 problems here. The fundamental problem is that you may REALLY have low oil pressure, since replacing the oil pressure sending unit has not changed the "low oil pressure" indicator. I would get a dial-type pressure...
Electric power steering replacement how much does it cost
From the description you have provided it sounds like it could be, the electric power steering motor has failed. It could also be, an electrical power or ground failure to the power steering motor. Before you have the electric steering...
Bmw locks and window not working
The blown fuse indicates an electrical short. Since it happens when either operating the windows or door locks, the short may be somewhere in the driver's door and/or door harness. Some vehicles can develop shorts in the driver's door wiring...
Just had my transmission oil leak fixed and now my car is acting up, when I'm slowing down it starts to like stall n then it stops
Hi there. Typically a slipping transmission will not cause the engine to vibrate and shake while the vehicle is in gear and nearly stalling when you stop. This is typically caused by a fuel system component failure, such as a...
I turn the key and I hear the starter spinning but it does not crank the engine. Is it the starter or part of it?
If the starter motor turns, but the starter pinion drive gear is not engaging the flywheel and turning the engine, there is a fault with the pinion drive gear and/or the actuating solenoid. The power to the solenoid can be...
Can I install a LT1 engine and a T56 transmission into a Subaru BRZ?
Hi there. This application would not be possible without some significant fabrication and full system alternations being completed. If you're going to consider any engine upgrade, stick with the same size and motor mount configuration - as it will have...

Related articles

A Buyer’s Guide to the 2012 Chevrolet Sonic
The The 2012 Chevrolet Sonic is not only the only domestic subcompact sedan (or hatchback) on the market today, but it’s also one of the most versatile models in its class. This entry-level subcompact car – available in both sedan...
Symptoms of a Bad or Failing Exterior Door Handle
If your car's exterior door handle feels loose or you cannot open or close the door, you may have to replace an exterior door handle.
How to Replace an Interior Car Door Handle
The inside handles on car doors fail when the handles come loose or when the doors are either hard to open or will not open at all.