Q: How do I replace the airflow sensor on my 1985 olds 98
Pulled old airflow sensor. Want to install new one. Do I need to re set computer first.
My car has 76000 miles.
My car has an automatic transmission.
Recommended Services
| Check Engine Light is on Inspection | $94.99 - $114.99 | Get a Quote |
| Mass Airflow Sensor Replacement | $188.36 - $786.53 | Get a Quote |
You definitely want to reset the computer when you make a repair like this. Resetting the computer will allow it to check the new component for proper operation and set a Diagnostic Trouble Code if there is still a problem. If you don’t reset the computer, the Check Engine Light will stay on and you will have no way of telling if there is something else going wrong. If you would like help with the repair, a certified technician from YourMechanic will be able to complete the repair of your mass airflow sensor, reset the computer, and check for any other problems.
The statements expressed above are only for informational purposes and should be independently verified. Please see our
terms of service
for more details
Get an instant quote for your car
Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing
What others are asking
My headlights burn out constantly
This is a common problem for this generation of Outback. The short life of the bulbs has been attributed to the bulbs being illuminated almost constantly. A secondary cause is that the bulbs are being touched during install. The Outback...
What should I do before I start the engine and begin driving?
All drivers should go through a series of checks before they start the engine and hit the road. These will help you avoid potential injuries and accidents, and enhance both your safety and that of others on the road. Check...
Engine revving when I pump the gas
There are a multiple list of components which can cause your issue. Your vehicle is particularly known to have throttle body issues (https://www.yourmechanic.com/services/throttle-body-replacement) and engine vacuum leaks. (https://www.yourmechanic.com/services/vacuum-pump-replacement) A diagnostic needs to be performed with special tools to correctly determine...
Don't know if the transmission went out.
A large transmission leak like one from a cooler pipe or a leaking transmission pan can cause the transmission to slip if the level gets low enough. Trying to drive the vehicle while the transmission is slipping does not help,...
Vehicle does not move when put into gear
A vehicle that won't move in any gear indicates either the transmission is low on fluid, or there is an internal problem. The electronic transmission controls can essentially be ruled out. The 4F50N transmission found in your vehicle has some...
4x4 light flashing but not engaging into 4 wheel drive
Hello there, many common faults will cause your 2007 Toyota Tundra to have the four wheel drive light flashing. The most common faults are a faulty four wheel drive switch, actuator failure, low transfer case fluid, or a shift cable...
V6 motors
Hi there. Many factors will impact fuel economy and efficiency on any gasoline or diesel powered vehicle. Driving "slow" isn't always as vital to fuel economy. However, what is important is being smooth with the acceleration. The allure of "quick...
Door ajar light always on leads to dead battery overnight. I may have found a temporary fix?
The body control module can be scanned to look at the inputs of each door and find out what door is staying open. A generic scanner may only tell you a door is open. The WDS or other high quality...
How do you remove the torque converter bolts off the flywheel? 2005 GMC Envoy Denali
Hello - with the vehicle safely supported to provide clearance underneath - in between the engine oil and transmission pan, there is a large, funnel-shaped aluminum casting (called the bellhousing), that physically mounts the engine to the transmission. At the...
Related articles
Symptoms of a Bad or Failing Engine Control Module (ECM)
Common signs of a failing PCM/ECM/ECU include the Check Engine Light coming on, engine performance issues, and the car not starting.
P0741 OBD-II Trouble Code: Torque Converter Clutch Circuit Performance or Stuck Off
P0741 code definition Torque Converter Clutch Circuit Performance or Stuck Off What the P0741 code means The Powertrain Control Module (PCM) will...
P2234 OBD-II Trouble Code: O2 Sensor Signal Circuit Shorted to Heater Circuit Bank 2 Sensor 1
P2234 P2234 code definition O2 Sensor Signal Circuit Shorted to Heater Circuit Bank 2 Sensor 1 What the P2234 code means Code P2234 is an OBD-II generic code for the Engine Control Module (ECM) detecting the O2 sensor signal wire...
Browse other content
Services
Estimates