Q: How do I install a front-facing child restraint with a seat belt?

asked by on January 13, 2016

How do I install a front-facing child restraint with a seat belt?

A front-facing child restraint system that uses a seat belt is easy to install. To do so, follow these quick steps: 1. Place the restraint on one of the rear seats. While you can install a front-facing restraint in the front seat, you should always situate it on a rear seat. If you use the front seat, be sure that the Passenger Airbag Off indicator comes on. 2. Run the seat belt through the child restraint system, following the instructions provided by the manufacturer. 3. Buckle the seat belt. 4. Extend the shoulder belt fully, and then release it so that it retracts. This sets the Automatic Locking Mode, which will ensure that the seat is held firmly in place. 5. Remove any remaining slack in the seat belt by pulling on the shoulder and lap belts. 6. Check all aspects of system and belt, by trying to move the child restraint. You should not be able to move the system more than an inch from side to side. Tips Always follow the instructions provided by the child restraint system’s manufacturer.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

How do I reset the air bags?
If you have been in an accident that deployed the air bags, then you’ll need to replaced and the system checked for integrity. Resetting the air bags loads them back into place, and resets the system, so that they’ll function...
Ceiling material falling
This means that the headliner glue is deteriorating, causing the fabric to fall. In most cases, the headliner will need to be replaced, or possibly the fabric can be re-glued by an upholstery shop, or someone who specializes in automotive...
Car is cranking but not firing up to start
It sounds like the starter is failing. Its drawing too many amps from the battery causing the battery cables to get hot and melt. I recommend having a qualified technician such as one from YourMechanic to perform a starter test...
Truck is lacking power when accelerating, has rough idle, cel on and some times stalls
If the Check Engine Light (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection) is on, then a fault code is set. While yes it could be the TPS, have the system diagnosed and fault codes pulled to verify what is actually causing the issue. If you replace...
I get a vibration when I put the car in gear in neutral. It runs smooth. I was thinking motor mounts?
Hi there. Engine mounts can definitely cause a roughness at idle, clunks, and thumps upon acceleration. Smooth out of gear and rough in gear is one indication of a mount type issue (https://www.yourmechanic.com/services/engine-mount-replacement). It may feel better in reverse than...
Car won't start or crank after rebuild and battery replacement.
Hi there: Due to the fact that there are multiple variables that we don't know about what was possibly removed, replaced or loosened up during your major repairs, it's very difficult to give you some ideas of what to inspect....
Coolant is leaking - how much would it cost to fix? 2009 Mini Cooper
Hello - for both the cooling system and the brake repair, a bit more information is needed. Repair costs for the cooling system leak will depend on what is causing the leak (water pump worn out, radiator hose cracked, radiator...
Not sure what part my car needs. It it shakes when I'm getting off the high way. And it feels like it's dancing in the front.
Hello, thank you for writing in. When dealing with a shake or wobble, its always best to start with the simplest options and work your way up in complexity. Make sure your tires are properly inflated, and have the tires...
Car not accelerating check engine light on
Hi Jesse. Thanks for contacting us today in regards to the issue with your Honda Accord. When a car will start but stall, it can be caused by a few different items, including an ignition system sensor (like crankshaft or...

Related articles

How to Handle a Car With Total Brake Failure
Brake Brake failure is terrifying and most motorists consider it to be a worst-case scenario. Here are a few things to keep in mind in case you find yourself in such a situation. Awareness of your surroundings is key. Relax...
A Buyer’s Guide to the 2012 Dodge Caliber
If If you’re looking for a compact car that offers a bit more space with acceptable fuel economy, the 2012 Dodge Caliber is a worthy target. The hatchback design is versatile, while the cooling storage compartment, removable flashlight (rechargeable) and...
Is it Safe to Drive With the Oil Light On?
The Engine Oil Light indicates low engine oil levels or low engine oil pressure. Pull over and check your engine oil to avoid major engine damage.