Q: Had the steering rack replaced and now the steering angle sensor is acting up after a front end alignment.

asked by on December 16, 2016

Power steering was getting hard in steering. Had it checked, replaced pump and belt. Found to be the Rack and pinion going bad, Had the Rack replaced by a local mechanic after which the Steering Angle Sensor (ESP/BAS light) and Anti Skid light keeps coming on as well as. Local mechanic took it to Dodge dealership for eval. Dealer said needs knew Steering Angle Sensor. Instructed to get a front end alignment and they ordered sensor. I have done the alignment and am wondering if it should be checked and recalibrated before replacing since it was not done before alignment. Dodge dealer wants $450.00 to replace. I get the feeling they just want to make the sale. $450.00 for 2 hours seems rather much. Thank you.

My car has 104000 miles.
My car has an automatic transmission.

Hi there. If the codes are coming on for the steering angle due to either the sensor failing or the plug not plugged in all the way. Check the harness on the steering sensor and see if its plugged in. If the harness is plugged in and has not moisture on it, then the sensor has probably failed. You can have the vehicle realigned, but if the sensor has failed, it will not correct its self. I recommend replacing the steering angle sensor. If you need further assistance with the steering angle sensor, then seek out a professional, such as one from Your Mechanic, to help you.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

Car starts and then turns off
I would recommend starting with having your vehicle checked for trouble codes with an OBD2 scanner. Once the codes have been pulled by a knowledgable technician, a strategic diagnosis plan can be made. The Check Engine Light code will aid...
Air conditioning compressor stopped working
If the compressor was recently replaced and has stopped working then most of the time it is because a fitting was left loose and all of the refrigerant came out or there is a loose electrical connection. It is also...
Gas tank leaks
Hello, sorry you're having problems with your gas tank. It might just be a loose or damaged filler hose that is leaking and needs to be replaced. I would recommend having a technician from YourMechanic come out and inspect the...
my car will turn over but not cranking up.
The symptoms you described lead me to believe that you have a fuel delivery-related problem. I suggest that you check for fuel pressure at the fuel rail. If pressure is within factory specifications, I would then do a fuel flow...
Noise while idling, difficulty shifting
Without hearing the noise myself, it will be hard to make an accurate assessment for your 2008 Chrysler Aspen. In many cases, where the noise source is not obvious, chassis ears may need to be used to locate the source...
Engine burning too much oil? Has no leaks at all. But I have to take it in every 2500 to 3000 miles 2007 Toyota Camry
Hi there - if your engine is using less than 1 quart every 2500-3000 miles, this is considered normal (https://www.yourmechanic.com/question/adding-a-lot-of-oil-between-changes-no-signs-of-a-leak) by most technicians, even if in stop-and-go environments. A "low oil " light comes on when only 1/2 qt low...
What would cause my engine to make a squealing noise in my 2012 Jeep Wrangler
Hi there. From your description of the noise and when it occurs it sounds like it is coming from the belt. It may be as simple as a worn out belt or one of the engine accessories may be failing....
2011 Ford Fusion idling rough and stalling out
The power brakes on your vehicle rely on engine vacuum. If a vacuum leak were to develop anywhere after the supply leaves the intake manifold, on its way to the brake booster, the engine could run poorly. To diagnose this...
Hi i have 1999 camaro 3.7 l. 5 speed. Latley it does not move in 1 st gear or reverse the engine revs but car doesnt move. Thx
Check the linkage to be sure the gear shifter is actually selecting 1st or reverse. If all other gears work, that is you can start out in 2nd gear and the clutch holds tight as you start out in 2nd,...

Related articles

Why Is It Important to Have a Vehicle's Suspension Aligned?
Correct car suspension alignment helps your vehicle perform better. Check wheel toe, camber, and caster to make your suspension and tires last longer.
How Do Modern Cars Steer?
Most Most people who have been inside of a car are familiar with the steering wheel and what it is used for. Most people who have been outside of a car are familiar with the front wheels and the fact...
How Long Does an Anti-Lock Brake (ABS) Fluid Level Sensor Last?
Your Your ABS system works both by means of electricity and hydraulic pressure. Fluid levels need to be monitored at all times, and that is the job of the ABS fluid level sensor. Located in the master cylinder, the ABS...