Q: Grinding sounds during braking, burning smell
I have brake system issues on my car. I had the rotors, pads along with calipers replaced. However, the grinding sounds are still noticeable when I'm braking. Besides the noise, there is a smell similar to burnt feathers, after a longer drive on the highway. What could be wrong?
Recommended Services
| Brake System Inspection | $94.99 - $114.99 | Get a Quote |
Hi there, thanks for writing in about your 2009 Ford Flex. The pad material used in the pad can be noisy and cause a light burning smell after use. This is normal and doesn’t require any fixing unless you change to a ceramic pad that it is available for your vehicle. If the problem persists or worsens, you may want to have the brake system inspected to ensure that this is not a sign of a more troubling problem.
The statements expressed above are only for informational purposes and should be independently verified. Please see our
terms of service
for more details
Get an instant quote for your car
Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing
What others are asking
Car makes noise when turning or slowing down
Hello. Depending on what the noise sounds like would tell me different things. I know that the most common noise I have had on this vehicle is a clicking noise (https://www.yourmechanic.com/services/loud-clicking-noise-when-i-turn-the-car-inspection). Most of the time this noise is from a...
Brake Lights don't work
If both of these features quit working at the same time, you may just have blown a fuse (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-fuse). If neither one of these are related, the problem may be two separate ones. The power locks are controlled by a...
Car in "limp-mode" - 2004 Mercedes-Benz Sprinter 2500
The boost pressure, and the intake charge temperature sensor in the turbo boost circuit are thought to be the most common origins of "limp mode" problems. The connectors on these 2 sensors become slightly corroded with time, miles and weather...
My engine dies when idling if I don't give it gas
Hey there, thank you for asking about your 2007 Honda CR-V. This is a common issue on many cars and is often times related to what is called an idle air control module. This module regulates the air flow into...
Car not staying started after not starting at all.
Hello, thanks for writing in. It sounds like the fuel pump may have failed. This commonly happens after a fuel up, especially if the fuel was low. I would listen to see if you hear a buzzing from the fuel...
Clutch won't work and the clutch pedal has no pressure.
Hi there. Check the slave cylinder and see if its moving. There could be a leak on the slave cylinder causing the slave cylinder not to operate. Also, check the pin to the clutch pedal and make sure that it...
High pitch frequency noise
The high pitch noise you are hearing is the fuel pump in the fuel tank getting noisey and will fail if the pump is not changed in the near future. The fuel filter and fuel pump along with the fuel...
Why does my Car jerks when put from park to drive
Hi there. In most cases when the car lunges or jerks when you shift into gear, it's due to mechanical gears not properly aligning or components in the driveline system (such as driveshaft, input and output shafts) being loose or...
White smoke from the exhaust
White smoke usually means coolant is burning. (https://www.yourmechanic.com/article/5-red-flags-that-your-car-needs-immediate-attention) In your case it may be getting into the engine through an intake gasket or a head gasket. I've seen occasions where a gasket might leak under certain conditions, hot cold, high...
Related articles
The Best Used Cars to Buy If You’re a Caterer
If If you are in the catering business, you need a reliable vehicle that will provide you with what you need to transport your food, linens, and other supplies. Generally speaking, you're better off buying gently used, because you will...
How Long Does a Power Brake Booster Last?
When When you press the brake pedal, your car slows down and eventually stops. Most of us put little more thought into it. We know that our brake pads need to be replaced periodically, and we’ll probably need to have...
How to Replace a Leaking Brake Line
Metal brake lines can rust and need to be replaced if they start to leak. Upgrade yours to a copper-nickel line to resist corrosion.
Browse other content
Maintenance
Services