Q: Good bulbs, good fuses, only middle brake light working, 2001 Honda Civic

asked by on October 23, 2016

good bulbs, good fuses, only middle break light work just bought car

My car has 131000 miles.
My car has an automatic transmission.

Brake light is not working Inspection $94.99 - $114.99 Get a Quote

Hi there. If only the high mounted light in the middle works, then there is a problem with the wiring to the rear lights. This is assuming that the bulbs are good. If the bulbs are fine then I usually start by checking for power to the rear lights. If there is none, then I would trace the circuits until I find power. All of these lights get the same power from the same switch so if the bulbs are good and if the bulb receptacles are fine, then the problem is in the wiring going into the truck. If you want to have your brake lights fixed, consider YourMechanic, as a certified mechanic can come to your home or office to diagnose and repair this brake light issue.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

I have excessive fuel consumption 125 km per 20 liters there is no check engine light car run smoothly no emissions? what is probl
It sounds like you may not be shifting the transmission at the appropriate times. The vehicle will not get optimum fuel economy if you are "over revving" the engine. To maximize fuel economy I suggest shifting at low rpm (2500...
Engine cranks but won't start. VTM-4 engine light is on. OBD shows codes P0365, P0340 & P0132
You say you turned off the engine as soon as the vehicle was stopped. Does this mean the engine still runs? The VTM-4 light is for the traction control (https://www.yourmechanic.com/article/how-does-traction-control-work) and you may have a problem with the system, which...
After new distributor and testing, car won't start
Confirm the basics first: Does it have spark at the plugs (https://www.yourmechanic.com/services/spark-plugs-replacement)? Does it have compression? Are the injectors (https://www.yourmechanic.com/services/fuel-injector-replacement) firing with proper fuel pressure? One (or more) of these is failing you, and will instruct the correct diagnostic path....
I was told my car has 2 thermostats. Is this true?
The vehicle with this engine size is equipped with a primary and a secondary thermostat in the cooling system. The primary and secondary thermostat open at different temperatures. The secondary one opens up at 203 F and should be fully...
Bcm replacement
If you are certain that the BCM has failed and you intend to get one from the junkyard anyway, I would recommend simply giving it a try. If it works, problem solved. If it does not work, it is very...
Yea, I'm wondering how to stop my stock factory alarm from going off. I don't know what I moved that started my alarm to go off in the 1st place.
Hi there. Remove the battery cables (https://www.yourmechanic.com/services/service-battery-cables) and leave the cables off for about 13 minutes. This will clear the immobilizer and the ECM (computer) to a learning mode. Then hook up the battery cables. If the alarm is turned...
P04042. In 328i bmw. 2009 how can a fixed
P0402 (https://www.yourmechanic.com/article/p0402-obd-ii-trouble-code-exhaust-gas-recirculation-flow-excessive-detected-by-jay-safford) means the exhaust gas recirculation (EGR) valve is flowing too much recirculated exhaust gas when it is commanded to open the flow of exhaust gas into the intake manifold. A consequence is the engine could be running rough...
My 2002 vw passat is trembling while parked , trembling during acceleration and at speeds under 40 mph . can u give me some advice
An engine shake (https://www.yourmechanic.com/services/engine-is-shaking-pulsating-or-vibrating-inspection) can be caused by a number of reasons. A broken or disconnected vacuum hose can effect the air/fuel mixture enough to cause a "lean misfire" and make the engine shake. The VW / Audi 2.8ltr is...
what happens if you add a lead substitute to an engine that run premium unleaded?
You should not add any lead replacements in this engine since the pistons and valve train is designed to not use it or need it. Lead was used to cool and lubricate the valves in older engines from the 60...

Related articles

Top 10 PZEV Cars for Eco-Friendly Drivers
Teddy Leung / Shutterstock.com The whole idea of a PZEV (that is, a partial zero-emissions vehicle), seems paradoxical. You’d think it’d have to either be zero-emissions or not in the category at all. But as contradictory as...
Symptoms of a Bad or Failing Anti Lock Pressure Switch
If your ABS system is not working or continuously running, or if your brakes are locking up, you may have to replace the anti-lock pressure switch.
How Long Does a Coolant Vacuum Valve Switch Last?
The The coolant vacuum valve switch opens when the heater is turned on, and allows coolant from the engine to enter the heater core. This warm air coming off of the engine is what provides you with heat to the...