Fuel fill inlet light is on in my 2014 Mustang. It’s NOT ...


Fuel fill inlet light is on in my 2014 Mustang. It’s NOT a gas cap issue because this model does not require or use a gas cap. Can this possibly be catalytic convertor issue? Mechanic's Assistant: Just to clarify, what are...

Fuel fill inlet light is on in my 2014 Mustang. It’s NOT a gas cap issue because this model does not require or use a gas cap. Can this possibly be catalytic convertor issue? Mechanic's Assistant: Just to clarify, what are the exact lights you're talking about? Fuel fill inlet Mechanic's Assistant: What is the make/model of your '14 car? Ford Mustang Mechanic's Assistant: Are you fixing your Mustang yourself? What have you tried so far? Yes. Did nothing so far

Automotive Expert
Hi! Welcome to JustAnswer. Thank you for contacting us for assistance with your vehicle. I'm Ron. I will be happy to assist you with your question. May I ask to whom I have the pleasure of speaking with today?

Ronnie Nielsen
Automotive Expert
Hi Ronnie. Nice to see you today! I'm sorry to hear you are having this problem. I know this can be frustrating. Ronnie, do you also have a Check [Engine](/topics-engine-ford/) Light set?

No
Automotive Expert
Ok, great. Thank-you, Ronnie. Please give me one moment to type out some information for you. Sit tight one minute... I'll be right back!

55357;�
Automotive Expert
Thanks for holding, Ronnie. From what you are describing here, this sounds like it will be the case of a problem in the EVAP (emissions control/recovery) System. This warning sets when the on-board computer sees the system is not holding pressure. And it assumes the reason is the problem is the inlet not sealing correctly, resulting in a leak. This will not be the case of a failing Converter. First thing to do here is to use a funnel and open and close the 'flap' located at the top of the fuel filler neck (where you put the fuel dispenser nozzle). Move this flap a few times and make sure it is sealing correctly. If this does not solve the problem, then the next course of action is to have the EVAP system "smoked". This is where a machine forces smoke through the system and any leaks can then be more easily found and repaired.

Can resetting the flap itself possibly fix the issue?
Automotive Expert
Yes. That's why I suggested doing that first.

Great. The vehicle is not with my now, but I'll try that ASAP.
Automotive Expert
Sounds like a good plan, Ronnie! Glad I could be of some help today! I hope everything works out well for you! Have a great day! Thank you for choosing Just Answer for your questions!

Question: it needs gas. Could my simply putting the gas nozzle in several times correct the issue?
Automotive Expert
It 'can' but you really don't want to be banging the metal dispenser nozzle against the inlet. It'd be a lot safer to use something plastic, like a funnel, as I mentioned above.

Good deal. Thanks & Merry Christmas ��
Automotive Expert
! Glad I could be of some help today, Ronnie! Merry Christmas to you as well!

What others are asking

How do I perform the relearn process?
Whenever the battery is disconnected, the engine control computer needs to go through a procedure. It needs to “relearn” how to operate under specific conditions again to perform optimally. To perform the relearn process. Set the parking brake and put...
"Gear may be engaged. Drive moderately."
Hi there. Sounds like you might be having an internal transmission issue. Automatic transmissions have many sensors and solenoids as well as valves, bands and clutches that are responsible for proper operation. Transmissions can set codes just like the engine,...
Loss of power, rough idle, and engine misfires.
Hi there. There are several electrical and ignition components on a 2007 Mini Cooper that could cause the symptoms you're describing. The ignition coil (https://www.yourmechanic.com/services/ignition-coil-replacement) would be the first item I'd inspect, but before I touched any part, I'd complete...
A bunch of warning lights just came on following a minor accident
With the vehicle being involved in an accident, there can be damage to wiring and/ or sensors, particularly if the radiator was impacted in even the slightest. Make sure the coolant level is correct. Even with the level correct, there...
How bad is it for the car if when I accelerate i let it go to higher rpms like 4 or 5?
Hi there: On a four cylinder or small six cylinder engine, accelerating the engine past 4,000 RPM on a consistent basis is not a good idea. The power band on lower gears tops out around the 4,500 to 5,000 RPM...
Car does not run on forward only reverse
This may be a sign of low transmission fluid (https://www.yourmechanic.com/services/transmission-fluid-service) or a faulty transmission control solenoid. As you know, automatic transmissions use pressurized hydraulic fluid to change gears. Every time a gear change is required, the car's computer activates a...
My enclave will not go in reverse and the trans oil smells burnt. Do you think the flex plate is damaged?
Hi there. If your transmission oil is black or burned and the transmission will not go into reverse, then the reverse input clutch is burned and slipping. There is nothing wrong with the flex plate as it would effect all...
Bubbles and pressure in the overflow tank
If the coolant level was low due to a leak, such leaks can be found during a leak diagnostic with simple pressure testing. If the cooling system doesn't maintain pressure, and no external leak is visible, coolant could be leaking...
Oil leak
This suggests you may have a leak resulting from a failing gasket somewhere in your engine. As you know, there are many different places in your motor that are sealed by gaskets. I would suggest narrowing this down by placing...