I drive a 2008 GT Mustang. Lately the air is only coming ...
Responses
Marc
216 days ago
Thanks for using JustAnswer.com! My name is \*\*\*\*\* \*\*\*\*\* I'll try to answer your car questions. I'll start off with some basic checks to do, then we can get into more advanced diagnostics if needed. Let me know if any questions come up, or if there is anything I can do to help! You can update this message at anytime.
- I'm sorry to hear about any troubles with the vehicle, but would be glad to try and help!
Customer
216 days ago
Ok sounds great.
Marc
216 days ago
- Recommend double checking all fuses with key on, then check for trouble codes with snapon/mac tools type scanner, and see if any codes setting in the climate control module. It may be that the airflow control motor behind the dash has failed and will need to be replaced, will need to check for signal to the motor from the control head.
- Attaching diagrams and illustrations to the message to help with repair, may need to be on pc/email platform to view.
- Check for power to this motor on the light green/yellow and red/white wires while moving the control knob back and forth. If it's getting power but not moving will need to be replaced.
- Lemme know if seeing any codes, or if any questions come up while checking things out!
Still not sure what you need?
Have a certified mobile mechanic diagnose what's wrong with your car, at your home or office.
Top Questions
Trending Topics
What others are asking
Car overheating because of bad thermostat
It sounds as though the thermostat is stuck closed; the fans may not come on until the flow is restored. They would need to be tested after the thermostat is replaced. I recommend having a mechanic, such as one from...
Xenon low beam not working
Hello. There is likely an electrical fault on the vehicle side of the wiring harness. Blow fuses or broken wires can plague any electrical system. I recommend having an experienced technician inspect the circuitry concerning the vehicle exterior lighting system....
Clunking noise, and poping sound when turning hard
Hello and thank you for contacting YourMechanic. When shifting your vehicle from park to drive or reverse, there is usually a problem with a universal joint in the drive shaft. The clunking noise is the bearings in the universal joint...
Could the power steering pressure sensor cause my steering wheel to be hard or hard to steer?
Hello. The pressure switch (or "sensor") (https://www.yourmechanic.com/services/power-steering-pressure-switch-replacement) on your vehicle supplies a signal to the engine computer to increase engine idle speed as the power steering line pressure increases. If the switch were bad, what you would notice is the...
I had Throttle body replaced 2007 chevy uplander. Car reving highvand then alot of oily clear fluud started flowing from front mor
Hi there. It sounds like a lot going on, but we're here to help. If the throttle is still revving the engine very high at idle, then there may be something either stuck or a vacuum hose is loose. Listen,...
A 500 Transmission is shifting harshly or delayed upon take off. There is no Check Engine or MIL light.
Hi there. Check the downshift solenoid on the transmission. It seems that the solenoid is sticking or not functioning correctly. I recommend servicing the transmission with changing the transmission oil and filter. If there is some dirt or gummy slush...
Why is my EPS warning light on in my 2001 VW Beetle
Your EPC light stands for electronic power control. This is for the powertrain control system. When the computer detects a failure in the system then this light will come on because the powertrain control system can no longer properly control...
Clunking noise when turning or going over bumps.
What you are describing sounds like a failing CV joint (https://www.yourmechanic.com/services/axle-cv-shaft-assembly-replacement). A CV (Constant Velocity) joint is a shaft that connects the transmission to the wheels, essentially transferring the power from the drive train directly to the wheels. The CV...
Car stopped while driving.
If the problem only occurred once, it is likely due to an electrical fault. A real time scanner might reveal engine controls operating out of range and that might provides clues as to the faulty system or component. Check for...
Browse other content
Estimates
Services
Cities
I drive a 2008 GT Mustang. Lately the air is only coming out of the defrost vents and floor vents. It will not come out the front ones, and this is with each setting it's turned to on the console. Mechanic's Assistant: How...
I drive a 2008 GT Mustang. Lately the air is only coming out of the defrost vents and floor vents. It will not come out the front ones, and this is with each setting it's turned to on the console. Mechanic's Assistant: How long has this been an issue? How many miles are on the car? For a week, there is 93,000 miles. Mechanic's Assistant: What is the make/model of your '08 car? GT Mustang V8 Mechanic's Assistant: Are you fixing your vehicle yourself? What have you tried so far? I hope it's something I can fix myself, I haven't tried anything yet.