All the dash lights come on and air stops working but the...
Responses
Bart
385 days ago
\*\*\*IMPORTANT PLEASE READ\*\*\*
Please make sure you've listed the Year, Make, Model, Drivetrain and [Engine](/topics-engine-ford/) information for your vehicle if you haven't already.
Thank You for contacting JustAnswer!
Hello I'm Bart. I am an ASE certified Master Technician with over 20 years experience in the Automotive Industry.
I know it can be frustrating having vehicle problems. I'll do my best to help you. Please understand that
I don't know what your skill level is, what tools you have available and I can not physically see what you are doing.
If it is more helpful the site automatically offers a premium phone call service where you can talk to me directly or another Expert may call you if you request it.
Please understand that this not a direct request from me as it is automated. You may accept or decline, but please understand that
I may not be able to call right away as I may be helping another customer or researching information related to the problem you are having.
If this is an electrical issue please a have voltmeter and 12 volt test lamp ready to use.
I would also ask that you tell me what parts you have tried
replacing to fix the problem. Doing so will help diagnose the issue faster.
If there are any trouble codes please provide them.
I'm reading the information you provided to the Mechanic's Assistant.
I may request more information or provide an answer momentarily. Just a moment.
Bart
385 days ago
This is most likely an issue with the SJB smart junction box. Check the connections to the box. If all good replace it.
Customer
385 days ago
Whats that
Bart
385 days ago
Just a moment while I search for an image to send you.
Customer
385 days ago
Ok
Bart
385 days ago
sjb
Customer
385 days ago
Ok I'll check it out tomorrow
Bart
385 days ago
It's located behind the passenger side kick panel.
Customer
385 days ago
I have to go in early
Bart
385 days ago
Understood.
Still not sure what you need?
Have a certified mobile mechanic diagnose what's wrong with your car, at your home or office.
Top Questions
Trending Topics
What others are asking
Brake pedal hits floor
Hello. With this combination of symptoms, it sounds like a bad master cylinder. The master cylinder fails internally and causes this. It can also occur if there is a brake fluid leak. I would check the brake fluid first and...
Van pulls to the right when accelerating at highway speeds
What you're experiencing is torque steer, which is the tendency for a front-wheel drive vehicle (such as yours) to pull to one side under acceleration. Some torque steer is normal in a front wheel drive vehicle. However, there are several...
Transmission Jerks
Have the drive shaft joints and rear axle pinion bearing checked to see if they have excessive play. Also, check to see if you have any broken motor or transmission mounts. This should help narrow down the problem for you....
when traveling a long distance my car will not accelerate over 60 my old Nissan did this as well. Is this a known issue?
Hello. Your particular model of Altima is equipped with a CVT transmission that will automatically put itself in a safe mode if the transmission fluid level (https://www.yourmechanic.com/services/transmission-fluid-service) reaches too high of a temperature. If the fluid temperature climbs too high,...
I have a bad knock sensor. Is it worth replacing?
Hello. Yes, you are correct - the P0325 (https://www.yourmechanic.com/article/p0325-obd-ii-trouble-code-knock-sensor-malfunction-sensor-1-bank-1-by-spencer-clayton) is indicative of a failed knock sensor (or the knock sensor wiring). I think it is a rare circumstance where you would not want to make this repair. It is straightforward...
Car shakes when driving
Hello, thanks for writing in about your 2010 Ford Focus. This is commonly related to out of balance tires, tires with uneven tread wear (https://www.yourmechanic.com/services/uneven-tire-wear-inspection), wheels out of alignment or as you know, when ball joints (https://www.yourmechanic.com/services/ball-joint-front-replacement) are wearing out....
OD2 scanner read trouble code P0101
Your computer may not be able to correctly interpret the data from the mass airflow sensor on your engine causing the P0101 (https://www.yourmechanic.com/article/-p0101-obd-ii-trouble-code-mass-airflow-maf-circuit-operating-range-or-performance-problem-by-john-nelson) code to keep returning. The manufacturer has a Technical Service Bulletin (https://www.yourmechanic.com/article/how-to-use-a-technical-service-bulletin-tsb-to-diagnose-and-repair-a-car-by-valerie-johnston) that came out January 30th...
While in park and stepping on the gas at 4000 rpm exactly the vehicles starts shaking.
The engine computer has a built in rev limiter built in to the programming that will not let the engine go above 3800 to 4000 rpms when the transmission is not in gear and driving down the street. This is...
Car shake when going over small bumps.
The suspension could be loose or have a broken bushing causing the control arms to move around or the shock absorbers are worn and causing the tires to bounce violently at highway speeds. If you need further assistance with your...
Browse other content
Cities
Services
All the dash lights come on and air stops working but the car still runs. Mechanic's Assistant: Have you checked the fuses? The dashboard bulbs? No, Im not sure how to do that Mechanic's Assistant: What is the mak...
All the dash lights come on and air stops working but the car still runs. Mechanic's Assistant: Have you checked the fuses? The dashboard bulbs? No, Im not sure how to do that Mechanic's Assistant: What is the make/model/year of your car? 2007 Ford Mustang Mechanic's Assistant: Are you fixing your Mustang yourself? What have you tried so far? I haven't tried anything yet. It did it about 3 months ago once. Now the past 3 weeks it does it once a week