Q: Does the 300ZX have a adjustable clutch?
trying to avoid buying new clutch can I ajust the clutch on the 300zx
My car has 22000 miles.
My car has a manual transmission.
Recommended Services
| Clutch is not working Inspection | $94.99 - $114.99 | Get a Quote |
There is no adjustment for the clutch itself, but you can adjust the clutch pedal. Adjusting the clutch pedal will help push the release bearing in farther as the clutch is wearing. All you can do is adjust the master cylinder pushrod at the clevis on the clutch pedal to make the pedal height higher or lower. If you need further assistance with adjusting your clutch assembly, then seek out a professional, such as one from Your Mechanic, to help you.
The statements expressed above are only for informational purposes and should be independently verified. Please see our
terms of service
for more details
Get an instant quote for your car
Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing
What others are asking
Local mechanic really messed up my car.
The park brake has a little contact switch that opens when the lever is pulled, sometimes a sugary drink gets spilled into the center console and leaves the switch sticky - usually requiring replacement. Your transmission solenoid seems to be...
Random misfire while accelerating on "Drive"
Well it does sound like you have been trying to tackle quite the misfire and driving issues on your Honda Accord. Taking such measures as cleaning your Honda's throttle body, the EGR and the intake manifold are great steps toward...
Vehicle shook violently while driving at a speed of 30mph
Hello. I think it is possible that your rotors have warped (https://www.yourmechanic.com/article/is-it-safe-to-drive-with-warped-rotors) again, and this is causing the shaking you are experiencing again. If you do a lot of driving and heavy braking, this could cause the rotors to warp...
1998 Nissan Cube (Japan) drive belt part number
The Nissan Cube was not sold in America until 2009. This model was a third generation compared to Japan's 1998 version which was the first generation. You may have to call the dealer or a local parts store to see...
Hardness in brake when press on pedal
Hello there, thank you for asking about your 1989 Buick Reatta. You may have more than one problem going on. Typically, a hard pedal is caused by a problem with the brake booster. If the ABS light is on, the...
When should I change timing belt and transmission fluid? 2008 Toyota Sienna
Hello - your Toyota does not have a timing belt that requires replacement periodically. It has a timing chain (https://www.yourmechanic.com/article/how-long-does-a-timing-chain-last), lubricated by engine oil, that lasts for much longer. Changing your engine oil and filter regularly is your best maintenance...
I hear a loud screeching noise when I take off
Hello there. Typically when a noise like this occurs it is due to a drive or serpentine belt that is loose or wearing out. It's also possible for pulley's that drive these belts are worn out and the squeaking is...
VSC TRAC, BRAKE AND TRAC OFF lights are on at the same time with no check engine light
Although the check engine and ABS lights are not on, using an appropriate scan tool you can still get the trouble codes that have undoubtedly been stored as a consequence of the VSC fault. If you situation is typical, the...
Related articles
A Buyer’s Guide to the 2012 Nissan 370Z
Whether Whether you opt for the roadster or the coupe in the 2012 Nissan 370Z, you will be choosing a machine that will provide outstanding performance and a luxurious interior that you won’t be able to tear yourself away from....
A Buyer's Guide to the 2012 Nissan Titan
With With the 2012 Titan, Nissan continues its march into domestic territory. This model lives up to its name, but it’s also quite impressive inside as well. Even if you are in the market and wouldn’t normally consider a truck,...
How to Replace a Clutch Master Cylinder
The clutch master cylinder supplies fluid and pressure for the clutch system to operate. Common signs of failure include leaks or loss of pressure.
Browse other content
Estimates
Maintenance
Cities