Q: Code 1349 P
While on the freeway I lost power to 1500 RPM, pulled over and the check-E-light came on so I ran a scan and got P1349 P. I made it home slowly by putting it into manual mode due to "NO" power. Ran the scanner again code called for misfire on #4 with fuel-cut-off so I changed out all the spark-plugs and #4 & #5 coil. Installed all and check all vac-lines, intake for leaks and cleared the check-E -light. Ran it for 5 mins and same code came back still shakes \ misfiring.
My car has 203000 miles.
My car has an automatic transmission.
Recommended Services
| Check Engine Light is on Inspection | $94.99 - $114.99 | Get a Quote |
Hey there. Try having the compression checked for each cylinder. I have had experiences where this code pops up due to a lack of compression from a burned exhaust valve. Also, are you using the right fuel? Using inferior fuel can cause problems as well like when you use 87 octane in a vehicle that requires 91 or higher. If you need to have the problem taken care of, a certified professional from YourMechanic can come to your car’s location to inspect the Check Engine code and pinpoint the appropriate repair.
Get an instant quote for your car
Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing