Someone cut the ignition wires to try to take my 2006 imp...
Responses
Mechanic01
259 days ago
Hello and thank you for using JustAnswer. My name is \*\*\*\*\* \*\*\*\*\* I will do my best to assist you.. I help many customers, so sometimes my replies are delayed, I will respond once available. During this conversation you will be given an automated offer for a phone call. You may accept or decline that offer.I don’t personally offer this service so if you take this another tech may call.
Did you try the 3x 10 key method yet ?
Customer
259 days ago
Dont know what that isWhat is 3× 10 key method
Mechanic01
259 days ago
ok go to the 30 min mark of this video it shows you how to, if the key does not relearn you will need a locksmith or dealer to reprogram the keys
[Chevy Colorado: No Start, No Crank - YouTube](https://www.youtube.com/watch?v=JXkXuz1yuf8)
Still not sure what you need?
Have a certified mobile mechanic diagnose what's wrong with your car, at your home or office.
Top Questions
Trending Topics
What others are asking
What tools will I need to replace the radiator on my 2000 Honda Civic?
At minimum you will need the following tools: a good ratchet, 10mm socket, 12mm socket, 14mm socket, long pliers for the hose clamps, a coolant drain bucket, another container to securely transport the old coolant to an appropriate waste facility....
Transmission jerks when changing gears when in drive.
Hello. This can be caused by a failing transmission, but there are other parts that need to be checked first. It can also be caused by worn out engine mounts (https://www.yourmechanic.com/services/engine-mount-replacement) or a bad cv axle (https://www.yourmechanic.com/services/axle-cv-shaft-assembly-replacement). I usually check...
If you got rocks in your gas tank, is it a big problem?
Hello. The problems you will have will be hearing the rocks move when you stop or take off. The other problem will be if the rocks were real dirty and may clog the pump (https://www.yourmechanic.com/services/fuel-pump-replacement) or filter (https://www.yourmechanic.com/services/fuel-filter-replacement). If the...
Clock spring compatibility
I do believe that the clock spring will still work considering that the steering wheel is the same and the steering wheel travel is the same. The best way to be certain is to compare the part numbers from the...
Check Engine Light on, catalytic converter and O2 sensors need changing - $3000
Hi there: If you're Check Engine Light is coming on and somebody diagnosed this as a problem with your O2 sensors or the catalytic converter emissions system, it's highly possible that the trouble part are the front or back bank...
Security system on my new to me car has been toggled on.
Hi there. Try taking the key and putting it in the driver door and unlocking and locking the door 3 times. This will make the computer acknowledge the key and finalize the programming. For the dash sound, that could be...
What is Estimated Cost of repairing P2432 code in 2012 VW Jetta ?
Hi - the P2432 problem code you have is an indication that the secondary air pump (https://www.yourmechanic.com/article/how-long-does-an-air-pump-last) pressure is low. This is an emissions device, which injects fresh air into the exhaust to allow burning of any remaining fuel in...
My car started to make a howling noise. A service center said it needs a new driveshaft i.e. Propeller shaft. There is no vibration.
Hi there. Your vehicle has CV shafts that drive the wheels. A howling noise is more of a wheel bearing grinding sound. Raise up the vehicle and rotate all 4 wheels and listen to there sounds. If a wheel is...
Having trouble with throttle does that mean my throttle going bad or does it mean I need to get it cleaned? 2011 Dodge Avenger
Hello - the required maintenance depends on which problem code is setting off the Check Engine light, and what the other symptoms are. A throttle position sensor failure will cause different behavior (and set different codes) than will a dirty...
Browse other content
Maintenance
Cities
Someone cut the ignition wires to try to take my 2006 impalla. I got wires back together but it wont start. It has a chipped key system. Is there any way to get it going without getting charged a fortune by a tech guy or locksmith...
Someone cut the ignition wires to try to take my 2006 impalla. I got wires back together but it wont start. It has a chipped key system. Is there any way to get it going without getting charged a fortune by a tech guy or locksmith? Mechanic's Assistant: Have you checked the battery, particularly the terminal connections? Are they corroded? Battery is fine Mechanic's Assistant: Are you fixing your Impala yourself? What have you tried so far? Yes by myself, i reconnected the cut wires and tried unhooking battery to reset system Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? Nope, i cant leave it where its parked obviously. Cant trust the neighborhood.