Hello, my 2016 Chevy 3500 was dead so we went to jump sta...


Hello, my 2016 Chevy 3500 was dead so we went to jump start it. My colleague put the net. On the positive park which I believe is the mega fuse. So in which both parts were on the positive. Mechanic's Assistant: Will the h...

Hello, my 2016 Chevy 3500 was dead so we went to jump start it. My colleague put the net. On the positive park which I believe is the mega fuse. So in which both parts were on the positive. Mechanic's Assistant: Will the headlights turn on? Is the battery fully charged? One head light turns on now nothing works on the dash Mechanic's Assistant: What is the model of your '16 Chevy? 3500 hd dually Mechanic's Assistant: Are you fixing your vehicle yourself? What have you tried so far? Just checking fuses so far. Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? That's it.

Automotive Expert
Hello there, I am Cam. I am licensed automotive technician with more than 18 years experience. As an expert on the site, I only have access to your question. Any billing questions or concerns would require a customer service specialist. A couple things before we get going; - I am around most days but not every minute of every day. If you reply while I am offline, I will respond when I am next online. -I am a Firefighter/Paramedic which might require me to drop and run at any time without warning. If this happens, I will reply as soon as I am able to. -The website will automatically offer a phone call. Some times they are beneficial, sometimes not. I am sorry to hear you are having troubles with your vehicle. While I am looking at your question, can you tell me who I have the pleasure of assisting today?

Thank you sir. It was my mega fuse. Already fixed
Automotive Expert
Ok, perfect. Is there more we can get for you?

No sir.
Automotive Expert
Have a wonderful day!!

Thanks you too!
Automotive Expert
.

What others are asking

Brakes grinding
Brake noise is quite common. Most likely what you are hearing is the sound of the worn brake pads grinding against the rotors. This problem can usually be solved by a simple brake job. A trained professional will be able...
Ignition lock cylinder broken
If the lock cylinder has truly been damaged, there are not a whole lot of options other than removing and replacing the damaged components. In order to do so, the door panel and lock cylinder can be removed and replaced...
Best AutoZone and Advance Autoparts tools
They sell various tools. Go there and see what warranty they have. It's not going to be like mine--mine is a top-notch, professional one. I didn't pay 9000 buck for it. I got it for free because I used it...
Transmission won't shift into park - 1988 Chevrolet S10
Hi and thanks for contacting YourMechanic. If your vehicle has a linkage, there should be an adjustment nut to adjust how long or short the linkage should be. Check for the nut and adjust the linkage to make the transmission...
Why do I have to pump the gas to crank it? It dies when I slow down to turn corners
Hello there, many common faults will cause your 2003 Chevrolet Malibu to have to have the pedal pumped to start it. Common faults would be the faulty throttle body (https://www.yourmechanic.com/services/throttle-body-replacement), throttle body linkage, fuel restriction, vacuum leak (https://www.yourmechanic.com/article/is-it-safe-to-drive-with-a-vacuum-leak), idle air...
squeaking noise from driver side wheel/door area
Hello. It sounds like you have an issue with the suspension of the vehicle. Most of the time when this occurs it is caused by worn out suspension bushings or ball joints. These areas move and flex when going over...
I put in a new battery. Alternator tested fine with meter. What else could it be? Battery light comes on again.
In order to know if the light is coming on for the alternator you will need to test at the alternator when the engine is at 2,000 rpms to see if voltage goes over 15 volts. If it does then...
I have brown goo in my radiator and there's brown on the cap
Hello there. The brown sludge you are referring to is often caused by rust or breakdown of the metallic and rubber components that comprise your cooling system. It is common for this to occur when a radiator and coolant lines...
73 f100 360 FE lurches then stalls when put in gear
Hi there. Typically when you put the truck in gear and it stalls, it's caused by a fuel delivery problem; usually a defective fuel pump, dirty fuel filters or a fuel filter installed backwards in some instances. It could also...