Q: Check Engine light won't go off

asked by on February 12, 2016

I was told that I needed a vapor canister purge solenoid for my 2004 Hyundai Elantra. Plus, the Check Engine light won't go off, and I can only pump $1.00 in gas and the pumps keeps cutting off like the tank is full.

Check Engine Light is on Inspection $94.99 - $114.99 Get a Quote

Hi there. The vapor purge solenoid releases the fumes in the gas tank. If the solenoid is stuck closed, the gasses can’t escape and try to come out the fill tube. The nozzles at the gas pump are designed to turn off if there is back pressure so that the fuel does not come flying back at you. That is why it keeps turning off every few dollars worth. The solenoid can fail, but it can also not be getting a signal to open. If the signal is not getting to it, it won’t work even if you replace it. If you need further assistance, I recommend you have a certified technician, like one from YourMechanic, inspect the Check Engine Light to make sure which component is causing the problem.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

What does the low tire pressure Warning Light mean?
The low tire pressure Warning Light is located on the instrument panel. This light illuminates when one of your tires is not inflated to the proper air pressure. Driving with an underinflated tire can be very dangerous, so stop as...
Rear main seal leaking
Hi there. The only way to fix a rear main seal is to remove the transmission, pull out the old seal with a seal puller, and install a new one. It is an extensive procedure and needs to be performed...
Car cranks, but doesn't start
Hello. A no start problem can be caused by a number of things. If it makes a noise like it wants to turn over, but doesn't, then the starter may be bad or it can be a failure in the...
Coolant leak fogging up window
Hi. It sounds like your heater core has failed. Hot coolant flows through the heater core and the heat is moved into the passenger compartment by the blower motor. The heater core is located under the dash which is why...
Squeaking at lower speeds
No, this is not a normal condition. If the parking brake is out of adjustment or there is damaged parking brake hardware on one or both rear wheels, this type of noise can occur. If it is determined that the...
resolving mechanics lien issue.
When buying a car with a lien on it (https://www.yourmechanic.com/article/how-to-buy-a-car-with-a-lien-on-it), you should have the title in hand and have the title signed by the lien holder and motorized. This has to be done to get the lien released and the...
Engine die when get hot
If your engine is shutting off when it gets hot it is possible that it could be overheating. Many vehicles have a feature built into the engine that will kill the engine if it reaches a certain temperature. For an...
Cam shaft position sensor
Hi there. The camshaft position sensors (https://www.yourmechanic.com/services/camshaft-position-sensor-replacement) are located on the front of your engine on the top under the engine cover. I usually do a complete inspection before replacing these because there are a number of reasons as to...
Honda says bad usb device when I connect a device that has previously worked
Hello, thank you for writing in. Honda does not use a seperate fuse for some of their USB circuits. If your model does have a fuse, start by checking that. There are several other cases of issues with the Honda...

Related articles

P0107 OBD-II Trouble Code: Manifold Air Pressure (MAP) Barometric Pressure Sensor Circuit Low Voltage Input Problem
P0107 Trouble code definition Manifold Air Pressure (MAP) Barometric Pressure Sensor Circuit Low Voltage Input Problem What the P0107 code means P0107...
P0357 OBD-II Trouble Code: Ignition Coil G Primary/Secondary Circuit Malfunction
P0357 P0357 code definition When the P0357 code is stored, it means that the PCM has detected one or more ignition coils (https://www.yourmechanic.com/services/ignition-coil-replacement) is faulty to some degree. What the P0357 code means Most vehicles with an OBD-II system utilize...
P0542 OBD-II Trouble Code: Intake Air Heater "A" Circuit High
P0542 trouble code means that there is an issue with the intake air heater “A” circuit high often due to faulty intake air relay or poor wiring