Q: check engine light stays on, replaced the mass air flow sensor
same as check engine light
My car has 124000 miles.
My car has an automatic transmission.
Recommended Services
| Check Engine Light is on Inspection | $94.99 - $114.99 | Get a Quote |
Hello, thank you for writing in. The vehicle will need to be scanned for diagnostic troubleshooting codes. The computer will set a code when issues have been detected. These codes are a way of helping you or the technician to determine what system(s) are malfunctioning. If the computer is giving you codes related to the MAF sensor, then you will want to check into the electrical wiring for the circuit. You will also want to make sure the air intake passages are clear, and that the air filter is new or clean. If you obtain the diagnostic codes from a technician or parts store, we can look into whatever symptoms you are having and determine what may be happening. With help scanning the vehicle and taking appropriate corrective actions, contact our service department.
The statements expressed above are only for informational purposes and should be independently verified. Please see our
terms of service
for more details
Get an instant quote for your car
Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing
What others are asking
How do I unauthorize a key fob that I lost?
Each of your key fobs is programmed specifically to work with your car. No other key fob will work with your vehicle. If you lose your key fob, or fear that it may be stolen, you want to unauthorized it,...
What climate control elements can be controlled from the touchscreen?
If your Fusion has the touchscreen navigation system installed, then it’s tied into your Automatic Climate Control system as well. You’ll find that some of the physical controls on the HVAC system are duplicated on the touchscreen (that way, if...
Door won't unlock with key
It sounds like you all keys for the vehicle had been lost and only the ignition key cylinder was replaced. If your keys do not work for the doors then you will need to have the [door lock cylinder replaced](https://www.yourmechanic.com/services/ignition-lock-cylinder-replacement...
Automatic transmission programming problem
While I agree that this is all probably built into the programming of the transmission computer, after looking at the Mazda service information, I see no TSB's that states Mazda has any updates available in transmission programming to address any...
Can't find the little hole that releases the key cylinder to take it out.
The key cylinder is not removable and is replaced as an assembly only. You have to remove the multi-function switch first then remove the bolts holding on the ignition lock assembly. If you need guidance on your ignition repair, a...
Car producing a rattling sound
Your 2015 Kia may use a brand new dual cutch transmission, which works differently than a traditional automatic transmission. That sound, combined with the conditions under which you hear it, makes me think you have a problem with your flywheel....
Engine light and throttle body light come on every morning when first start
Hi there. Check the Manifold Absolute Pressure (MAP (https://www.yourmechanic.com/services/manifold-absolute-pressure-sensor-map-sensor-replacement)) sensor voltage. Key on engine off it should be approximately 4.5 volts, idling in the 1 volt range and go over 4 volts at a snap throttle. Then, check the Throttle...
I have 92 Toyota Camry. Oily smoke comes from the back of the engine bay
you probably have an oil leak at the valve cover gasket that is dripping on the hot exhaust pipe. When the pipe gets hot enough to boil the oil it makes a nasty smelling smoke. You should have it corrected...
My reverse went out and the car won’t go over 20mph. It’s making noises as well.
The first thing to do is verify the fluid condition and if it is full. If the fluid is full then smell the fluid and put some fluid on a white towel to see if it is very dark and...
Related articles
P0150 OBD-II Trouble Code: O2 Sensor Circuit Malfunction (Bank 2, Sensor 1)
P0150 P0150 code definition O2 Sensor Circuit Malfunction (Bank 2 Sensor 1) What the P0150 code means P0150 is the OBD-II generic code indicating the O2 sensor 1 for bank 2 fails to meet the minimum or maximum voltage limits...
P2047 OBD-II Trouble Code: Reductant Injector Circuit/Open Bank 1 Unit 1
P2047 P2047 trouble code definition The P2047 code is a general OBD2 trouble code that points to a fault within the reductant injector circuit. What the P2047 code means The P2047 code means a fault is present in the reductant...
P2123 OBD-II Trouble Code: Throttle/Pedal Position Sensor/Switch D Circuit High Input
P2123 P2123 Code Definition Throttle/Pedal Position Sensor/Switch D Circuit High Input What the P2123 code means The P2123 trouble code indicates that the Engine Control Module (ECM), which is in charge of receiving a signal from the throttle position sensor,...
Browse other content
Services
Cities