Q: Check engine light and low idle

asked by on October 15, 2017

My cars check engine light is on, it idles too low and goes up and down. It sometimes stalls at a stop but I can start it after like nothing. I don’t know what could be the problem

My car has 196000 miles.
My car has an automatic transmission.

Idle Control Valve Replacement $162.54 - $1028.01 Get a Quote

What you are describing sounds like a dirty or failing idle air control valve. The idle air control valve monitors the air intake as it is mixed with fuel prior to being injected into the engine at low speeds and at idle. This valve is controlled by the vehicle’s computer and will adjust idle speed based upon other measurements such as engine temperature, intake air temperature and electrical system load or voltage. This is also an important function when starting the motor as it allows the motor to run and idle on it’s own once the motor fires. When you accelerate, the engine RPM increases, and as you let off the gas, the RPM slowly returns to the normal idling speed with the help of the idle air control valve making the transition from a higher RPM back down to idle speed while adjusting the air/fuel ratio constantly to allow this to happen smoothly. When the engine RPM drops below the normal range of about 750-800 RPM, this often times will cause the engine to stall indicating a dirty or faulty idle air control valve. I would recommend having an expert from YourMechanic come to your location to diagnose and inspect your vehicle.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

How do I fold back the side view mirrors?
Your car’s side view mirrors fold back (and forwards) to help prevent damage. It’s a good idea to fold them back when entering a tight spot, when using an automatic car wash, or when parked on a street with busy...
How do I use the Pass Temp feature?
The Pass Temp feature allows you to change the temperature between the driver and passenger side. This makes them the ride more enjoyable for both the driver and passenger. To use the Pass Temp feature: Press the Pass Temp button...
my car swayss back and forth on its own. starting at 30mph
Hello. If you have replaced these parts and it is still swaying then you need to check the tires (https://www.yourmechanic.com/article/how-to-tell-the-difference-in-size-for-a-car-tire-by-jason-unrau). Make sure that they are the correct size. Aftermarket wheels will also cause this problem if they are not the...
Engine tick and check engine light.
Hello, thanks for writing in. It is possible that you have a fuel injection issue, but that is not that common on this vehicle. Most of the time when this occurs with a ticking noise also it is due to...
Car shakes violently when idle.
Shaking or vibration (https://www.yourmechanic.com/services/engine-is-shaking-pulsating-or-vibrating-inspection) may be caused by many different things such as faulty spark plugs, poor fuel pressure or misfires. Other things such as a faulty idle air control valve (https://www.yourmechanic.com/services/idle-control-valve-replacement) may cause the engine idle to drop below...
Filling up at the gas station.
The issue is the purge vent hose on the fuel filler neck (https://www.yourmechanic.com/services/fuel-filler-neck-replacement) is either leaking or it is plugged up causing the fuel system to vapor lock making the fuel not flow into the fuel tank properly. Check the...
I have a 2013 dodge ram 1500 that reads wrong key fob. My truck is manual everything so I have no fob just the chipped key.
Hi Bobbie. Thanks for sending your question today. Usually, when it's a communication error, the root problem is a trapped security code inside the ECU. This often has to be removed by a dealership since they have the proprietary software...
Car not starting
If the codes you get say to replace the ECM then you should replace the ECM and not just have it programmed. It would help us better to diagnose the problem if you supply the codes you get.
My car acclerates fine but is hard to accelerate after driving for some time, even while flooring the gas pedal.
If the poor acceleration is intermittent, that suggests a cause involving an electrically controlled component including sensors that send data to the PCM. To diagnose this, a real time scanner is applied to view actual engine operating parameters during the...

Related articles

A Buyer’s Guide to the 2012 Mazda 5
If If you’re looking for a vehicle that isn’t quite a minivan yet is bigger than a wagon, you’ll love the 2012 Mazda 5. With enough room for six adults, sliding rear doors that make it easy to get to...
The Best Used Cars to Buy for Long Commutes
Most Most of us are faced with the prospect of commuting back and forth to work on a daily basis, but some have a much longer drive than others. When it comes time to buy a car, you need to...
Mazda Certified Pre-Owned (CPO) Car Program
If If you have been shopping for a used Mazda vehicle, you may want to check out cars under their certified pre-owned program. Many manufacturers have a certified pre-owned (CPO) program, and each one is set up differently. Read on...