Q: Car won't start - 1988 Mercedes-Benz 300TE
I was on my way to my mom’s and needed to get some gas. So I pulled into a station, filled up the tank, went to start the car and it wouldn’t start. I didn’t hear the fuel pump fizzle when I turned the key, so maybe it’s the fuel pump relay. After sitting for 15 minutes my car started, so I drove straight home. When I got home and turned off the engine, I tried starting it again. And it wouldn’t start. Do you have any ideas or suggestions?
Recommended Services
| Fuel Pump Replacement | $145.32 - $1299.70 | Get a Quote |
| Car is not starting Inspection | $94.99 - $114.99 | Get a Quote |
Hey there. Your fuel pump may have a heat related failure and needs to be cooled to get it to work. The pump is in the fuel tank and needs to be tested first by a mechanic to see if it is seized. You may also need an injection pump fuel cutoff that is bad if you have fuel pressure to the pump. If you want to have this checked, a qualified professional from YourMechanic can come to your car’s location to diagnose the no-start and have this corrected properly.
The statements expressed above are only for informational purposes and should be independently verified. Please see our
terms of service
for more details
Get an instant quote for your car
Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing
What others are asking
How do I install a head restraint?
The front head restraints, and the rear center head restraint can be removed. After being removed, these head restraints will need to be reinstalled. Installing one of the head restraints takes only a few seconds: 1. Insert the head restraint...
Warning lights coming on.
Hello, With all those Warning Lights and the Check Engine Light on, the car needs to be connected to a scanner to see what faults are present. You will need the help of a mechanic with a scanner, such as...
Hello I have a 2006 f150 XLT with a 2v 4.6. It has a cold air intake from k
Hi, thanks for writing in. I'd be happy to help you. Code P2104 (https://www.yourmechanic.com/article/p2104-obd-ii-trouble-code-throttle-actuator-control-system-forced-idle-by-jay-safford) relates the throttle position control actuator, and code P2126 (https://www.yourmechanic.com/article/-p2126-obd-ii-trouble-code-throttle-pedal-position-sensor-switch-e-circuit-range-performance-by-jamahl-walker) relates to the throttle position sensor. When either of these components is not working properly, this...
How can I tell if I have a bad neutral safety switch?
Hello, thanks for writing in. The switch (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-neutral-safety-switch) should show "connectivity" (zero resistance) in the "Neutral" position for a successful start. Keep in mind that these symptoms could also be from the ignition switch (https://www.yourmechanic.com/services/ignition-switch-replacement). If you need help having...
Engine won't idle when cold - 2001 Chevrolet Silverado
Hi there - given your repairs already, I would suspect a fuel-related issue (https://www.yourmechanic.com/question/my-car-starts-and-then-dies-several-times-before-it-will-stay-running-but-only-when-it-s-cold-by-tommy), specifically the engine coolant temperature sensor (for engine management, not the gauge). If a faulty temperature signal is sent to engine management, the engine may not...
Car Sitting waiting for repair. Sat 9 Months Now repair finished but will not start.
Hi...gasoline has a limited shelf life. After four months or so, but sometimes even earlier, gum and varnish develop. Gasoline that is nine months old will typically not have enough of the volatile fractions (from the refinery process) to start...
1997 GM TBI 5.7 : Idle too high
Hi there. Check for any vacuum leaks that the engine may have. Look for any vacuum hoses or ports that are not connected. Vacuum leaks on the engine will contribute to the engine having a higher idle. If the vacuum...
I have a 1997 ford ranger. I was informed by highway patrol last night that none of the lights on the rear of the truck are workin
Hello, thank you for writing in. There are several different lights at the rear of the vehicle. They are run off of different circuits to control them separately and in order to keep them from all going out at once....
2002 s-10 4 wheel drive question when you press 4 wheel drive button either hi or low it blinks once and goes back to 2 wheel dri
Check to see if hose hooks to the air cleaner assembly? As far as the 4x4 not shifting you may have a transfer case not shifting internally and will cause the problem. Have a mechanic like one from YourMechanic check...
Related articles
How to Tell If Your Car Switches Are Dying
Since Since every part of your car is controlled or operated by a switch in some fashion, it is to be expected that the switch will eventually fail. Some of the most commonly used switches in your car are: Power...
How to Test a Spark Plug Ignition Coil
If you suspect your car has a faulty spark plug, use a multimeter to test it out in 7 straightforward steps.
How to Adjust Timing on a Car
A well timed ignition will allow the engine to run powerfully and efficiently. The timing needs adjustment when the engine runs too lean or too rich.
Browse other content
Services
Estimates
Cities