When I try to start up the car it shakes and makes a drag...
Responses
Chad Farhat
391 days ago
Hi, I'm Chad. Welcome to JustAnswer. I'm reviewing your question and I will be posting your reply ASAP.
Thank you for your reply and that information as this does help me better understand the situation. I’m sorry to hear you are having this problem. I know this can be frustrating. Please give me one moment to type out some info for you. I’ll be right back!
A live optional phone call will be automatically offered by JustAnswer, you can accept or if you decide to decline we can continue with text until you feel the live call would be better suited to you.
I will try to help you on this here
is the clutch disc orignal on it ?
prior to this happening ,was the clutch pedal engaging at top of the pedal travel or at the bottom ?
can you you engaged in forward gears and move forward or no ?
**Please Let Me Know**
**Thank You**
**Chad Farhat**
**ASE Certified Technician**
Customer
391 days ago
I was on a three hour drive and about 2 1/2 hours into the drive the car had an off smell... When I tried to switch the gear it wouldn't let me and when I tried to make it switch gear it made that dragging noise worse and the car was shaking and of course it had that off smell.I bought the car via third party. I don't know much about cars and since I've had it... At least after I had an interlock installed I first had issues with the battery being dead... And then it wasn't fully that so I changed the alternator.... And now this issue....I am comfortable with a call as well.
Chad Farhat
391 days ago
ok got you
This all sound that the clutch disc has worn out and not it is not separating from the flywheel to allow to engage and it will shake and drag when the clutch is worn out
that should be the first thing to check on it
NO Call Needed, Ignore it , Sorry website sending it not me
Customer
391 days ago
Everything seemed to be working great... I believe it was engaging well and rpms and the speed meter were reading accurate. When I turn the key but won't start it all the lights pop up and it tries to start. When the car started doing this the check engine light came on.Are those parts cheap if I buy them myself then get them installed?
Chad Farhat
391 days ago
It is not able to start or feels like dragging because the disc is holding the flywheel in place where it supposed to separate from it
Parts: Clutch disc kit : $200
labor: 5 hrs, Transsmion has to be removed to access clutch disc
Customer
391 days ago
Ahhh okay so what kind of fix will this be? Are those parts expensive to replace?not terrible!Thank you sooo much! How does this usually happen? Is it something I'm doing wrong when I switching gears?
Chad Farhat
391 days ago
Buy the parts and find a shop to install it ,not expensive
If you have any follow up questions, please let me know using the reply button. If you are satisfied with my help, please let me know so we can complete your question.
Thank You
Chad Farhat
ASE Certified Technician
Please Read Below How to Get Back in touch with Me
You Can Always Come Back to this Conversation and Ask Me any Follow up Question you May have on this Issue
(You can Copy this Link Page & Paste it in your Browser when Ready and it will Open up our Conversation Again)
or there should be a Tab on your Screen to Add me As Your Favorite Expert
I'm Online Daily from 7 Am Till Late Eastern Time Zone
Thank You?Chad Farhat?ASE Certified Technician
You are very Welcome
If you need my assistance in the future, Start your Question with (FOR CHAD FARHAT ONLY) or Go to my profile page
You can also add me as Favorite expert for any future questions
[http://www.justanswer.com/car/expert-chadfarhat/?rpt=3800](//www.justanswer.com/car/expert-chadfarhat/?rpt=3800)
Customer
391 days ago
Thank you!!
Chad Farhat
391 days ago
you are welcome
Customer
391 days ago
FOR CHAD FARHATFOR CHAD FARHAT ONLY
Chad Farhat
391 days ago
how can I help you
Customer
391 days ago
I put oil in my car (it was completely empty) and it now starts... This is the noise it was making prior to when it wouldn't even start up.... So progress but now that it starts in it's making that noise still.
Customer
391 days ago
Customer attachment 9/6/2020 10:31:39 PM
Customer
391 days ago
This is it after the oil ran through a bit and it starting turning on.
Customer
391 days ago
Customer attachment 9/6/2020 10:32:40 PM
Customer
391 days ago
if I give it has it rems up the engine but then goes back out then starting making that screeching noise.
Chad Farhat
391 days ago
I see that
but do you see how the shifter is also vibrating when it started
how much engine oil you added ?
Customer
391 days ago
Yeah! It's still doing that so I'm wondering if it was the oil being ran out and something going on with the clutch?Sorry I'm also trying to teach myself here one because I want to learn and two it's cheaper if I'm capable of doing it myself. Lolthank you for your help and patience!
Chad Farhat
391 days ago
when you mash on the clutch pedal how does it feel? strong, comes back at you when pressed?
or does it stay down
:) the clutch be hard to do without a car lift and some major tools
the oil in engine and clutch shaking should not be related
Customer
391 days ago
Yeah the clutch is a little more roughUghh of course ��
Chad Farhat
391 days ago
it does not even sound like it is starting to me from the video,it is trying too,i saw u kept your hand on the key in start position and when you let go it cut off
Customer
391 days ago
Okay... So it's just weird how my car wouldn't start but now it starts just has that odd noise.Yeah so the first one is when the car wouldn't start.But it starts nowI just didn't take a video... But you can see in the second video the alternator is now going because the car is now running.
Chad Farhat
391 days ago
I m not there, but all this leads towards the clutch, throw bearing, and pressure plate ( which is all part of the clutch will be the issue here, so you need a clutch kit
if starts now that is good, if it was really low on engine oil, the oil pressure switch was preventing from starting earlier the only thing i can thin off
I just saw that second video, that sound like a knock on internal to the engine ?
does that noise under the hood goes away when the clutch pressed in ?
Customer
391 days ago
Nope it stays .. my other friend thinks it's the motor
Chad Farhat
391 days ago
the second video sound like a rod bearing internal to the engine and that means, another motor or rebuild that one
and you can also have a clutch issue, I can tell 100% just from the video
Customer
391 days ago
Damn... Well I'll probably just [sell](/topics-sell/) it and I'm sure it will sell fast because it's a good car otherwise and not very many miles
Chad Farhat
391 days ago
I understand, i m sorry
have a great rest of the evening ,we talk to you later
Customer
391 days ago
You too!
Chad Farhat
391 days ago
Thank you
You are very Welcome
If you need my assistance in the future, Start your Question with (FOR CHAD FARHAT ONLY) or Go to my profile page
You can also add me as Favorite expert for any future questions
[http://www.justanswer.com/car/expert-chadfarhat/?rpt=3800](//www.justanswer.com/car/expert-chadfarhat/?rpt=3800)
Still not sure what you need?
Have a certified mobile mechanic diagnose what's wrong with your car, at your home or office.
Top Questions
Trending Topics
What others are asking
Car is too low
The leveling system on your vehicle works much like filling balloons. When the sensors detect the car is too low, they turn on a pump that fills the bags with air to bring the car to the proper height. If...
Car will not start
If the vehicle is not restarting and there is no electrical power to the computer, then your automatic shutdown relay may be causing the problem. This relay is in the main engine relay box. If you are having a loss...
I have a Ford Triton 5.4L Engine with a loud knocking noise,
The camshaft phaser can cause the noise you describe and also the drivablity issues. I would certainly fix it. There is a cam phaser lockout kit available and I would recommend using the kit instead of replacing the phaser. The...
What is proper reading on wires inside distributor?
11.88 is low for an automotive battery. A reading within .2 volts of the battery can be expected. It may just be running out of juice from cranking and will need to be charged fully before it is put to...
Can I get a high output alternator for my car for putting in a bigger amplifier?
Hello. There are aftermarket alternators on the market that you should check the internet for kits for this vehicle so you can install the larger amp. You may find that this large of an amp may require a second battery...
Problem with car dying
This is a sign of a failing idle air control valve (https://www.yourmechanic.com/services/idle-control-valve-replacement). This is a unit that is located on or near your intake manifold that monitors the air intake as it is mixed with fuel prior to being injected...
In cold weather, the service all wheel drive light comes on 2008 Chevrolet Equinox
Hi there - this is a frustratingly common problem (https://www.yourmechanic.com/question/what-does-it-mean-if-the-message-center-says-check-awd-or-awd-off) with this model. If a problem code of C0550 is set (whether Check Engine is lit or not), it is possible this warning is the result of a lot battery...
My battery light came on its making a real bad whinning noise
Charging system output should be verified against factory specifications as the alternator may have failed which would account for both the noise and the battery warning light. It is also possible that the noise, and a charging failure, could be...
Strange noise while idle and worst when decelerating
Hello, thank you for writing in. The knocking noise from the video may be related to the new distributor that was installed. The distributor and timing can cause pre-ignition of the air-fuel mixture. This causes the rough idle and the...
Browse other content
Estimates
Cities
Maintenance
When I try to start up the car it shakes and makes a dragging noise... Almost sounds like it's under the car... I have a manual. The car lights and everything turn on ac everything but when I turn the key all the way over it won't...
When I try to start up the car it shakes and makes a dragging noise... Almost sounds like it's under the car... I have a manual. The car lights and everything turn on ac everything but when I turn the key all the way over it won't start makes the shaking and noise like something is dragging at the bottom 2006 subaru impreza manual Mechanic's Assistant: Can you turn the steering wheel at all? And what about the key? Is it worn or damaged? No the car will try to start up but then shakes and makes that dragging noise It happen while I was driving and it wouldn't let me switch gear Mechanic's Assistant: Are you fixing your Impreza yourself? What have you tried so far? I have to get it towed Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? No that's it. The car is only at 155458 miles.i already switched out the battery and alternator. It's not that.