Q: Car runs rough, Check Engine Light on, and bad fuel mileage - 2005 Suzuki Verona
My car has developed a few problems. First, it has been running with a moderate level of roughness; not extremely bad, but annoying. Also, the CEL light started flashing intermittently. At times it is a solid light and other times it flashes. Yet another problem is that I am getting bad fuel mileage. I am thinking that my car might be misfiring, but I have not pulled the plugs yet, so I’m not sure about that. Could you please give me any advise as to what I need to do to repair my car?
Recommended Services
| Check Engine Light is on Inspection | $94.99 - $114.99 | Get a Quote |
Hi there. I would start first by checking for codes that are causing the Check Engine light to come on. This will direct diagnosis and let you know if it related to fuel, spark, compression, or another system. Have a professional mechanic, like YourMechanic, diagnose the Check Engine Light and correct the issue. Proper addressing of the Check Engine Light will likely solve the rough running issues as well.
The statements expressed above are only for informational purposes and should be independently verified. Please see our
terms of service
for more details
Get an instant quote for your car
Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing
What others are asking
Car not driving straight.
If your wheel is not straight you could have a broken control arm or something else may be broken in the suspension. I would have the car checked out by a technician who can better determine the cause (https://www.yourmechanic.com/services/brakes-steering-and-suspension-inspection).
Vehicle shaking
Hi. Out of balance wheels are typically the most common cause for shakes or vibrations, but there are many other possible causes. They include, loose suspension/ steering parts, an engine misfire, or even a tire that has a bubble or...
I'm smelling gas after I drive everytime
I did not seem to find any technical bulletins for this issue. I would first recommend not driving the vehicle until you have the system checked to see what kind of fuel leak or vapor leak you are having. If...
AC leak on a 2008 Prius
Understand that's a Prius and that car has an AC compressor that works on hundreds of volts electricity. It's an electric compressor. It uses special fluids, too. You can't use the regular AC fluid as it will short it out....
The car goes to the right on bumpy roads and bounces badly
You may need to have your lower control arm (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-control-arm-assembly) bushings checked for problems on both sides. If the bushings are worn, they may need to be replaced or the lower control arms need to be replaced. Have a certified...
Why did my wipers stop working?
Hello. If you can hear movement from the motor but your wipers are not moving, then it is possible that the wiper linkage or bushings have broken or become damaged. Your vehicle uses a linkage mechanism with bushings that connects...
Rough start but will start fine after about 5 minutes of running. Now ticking has developed.
Hi there. A ticking noise on the front of an engine that comes and goes could be the drive belt tensioner being worn, pulleys out of alignment causing the components to fail making the noise, or the timing belt tensioner...
Crank but no start
Hi there. This problem might be cause by an ignition system component failure, such as a crankshaft or cam position sensor. It's also possible that a fuel system component might be the source of your issue. It's best to have...
The computer for my car says it's EGR flow and there is no other symptoms. What you think?
Either the EGR (Exhaust Gas Recirculation) valve is stuck open or is closed and not opening. First try removing the EGR valve and cleaning it out. Then see if the engine light goes out and the engine runs good. If...
Related articles
P2071 OBD-II Trouble Code: Intake Manifold Tuning (IMT) Valve Stuck Closed
P2071 P2071 code definition P2071 is a generic OBD-II trouble code indicating a fault with the intake manifold tuning (IMT) valve stuck closed. What the P2071 code means The intake IMT valve is used to tune the airflow inside the...
P2506 OBD-II Trouble Code: ECM/PCM Power Input Signal Range/Performance
P2506 P2506 code definition ECM/PCM Power Input Signal Range/Performance What the P2506 code means P2506 is an OBD-II generic code for the Engine Control Module (ECM) detecting if the power input signal is not within range or when its performance...
P2167 OBD-II Trouble Code: Throttle/Pedal Position Sensor E Maximum Stop Performance
P2167 P2167 code definition Throttle/Pedal Position Sensor E Maximum Stop Performance What the P2167 code means The P2167 code is a general OBD-II diagnostic trouble code (DTC) (https://www.yourmechanic.com/article/what-is-the-on-board-diagnostics-obd-system) that indicates a fault with the throttle / pedal position sensor E...
Browse other content
Cities
Maintenance