Q: Car loses power once it warms up

asked by on February 22, 2016

I think my problem is electrical in nature. My car will start and run all day, as long as the engine is cold. Once the engine warms up, it suffers a total loss of power. When it dies, it starts right back up and idles. I am not getting an error code.

Loss of power Inspection $94.99 - $114.99 Get a Quote

If no error codes are present, this is generally an indication that the base air fuel ratio may be set up incorrectly by the ECM. This can occur if the mass air flow sensor and idle valve are reading/operating incorrectly, but are within the ranges expected by the ECM. The mass airflow sensor and idle valve should be inspected for carbon buildup and deposits. If buildup is present, the the parts need to be cleaned, or good parts can be swapped for testing purposes. You may want to enlist the help of a mechanic, such as one from YourMechanic, to run a diagnostic inspection of your power loss condition, and recommend the best path to repair.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

How do I turn on the sun visor mirror light?
The sun visor mirror light will automatically turn on when the mirror is accessed.
Problem with acceleration
Hi. There are dozens of potential causes for your problem. It could be anything from a worn fuel pump to a clogged air filter. If the Check Engine Light is on (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection), the first step is to retrieve the diagnostic...
Broken ignition will it start if I replace the whole steering column ?
Hello there, a few different things can cause the ignition to brake. If the ignition was broken due to a theft, then the usual repair would be to replace the ignition switch (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-ignition-switch) and key cylinder (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-ignition-lock-cylinder). It would be...
Jerking when accelerating - 2006 Kia Rio5
I would take the vehicle back to where the oil and transmission work were done immediately to have them check it out. It's possible the car wash put water in places it should not be in the engine compartment. On...
My car continuously overheats and blows the radiator cap
It sounds like you may have a restriction in your cooling system that is preventing the proper flow of coolant through the engine. I would recommend having the system power flushed to remove any restrictions that may exist. The restriction...
Replaced starter now the fuel pump not working
Hello there, it is unlikely that both the starter and fuel pump would fail on your 2011 Hyundai Sonata at the same time. In cases like this, the car needs to be thoroughly inspected and the root cause located before...
Low beams are quite dim, high beams seem OK. Although filaments turn on inversed.
Hi there. Typically, dim lighting is the result of a poor ground (https://www.yourmechanic.com/services/electric-problems-inspection) in the given lighting circuit. This poor ground may also account for the fog lights not functioning in the low beam position. Circuit testing with a wiring...
Oil pressure low- engine reduced power
This light will usually come on when one of two things are happening. Either the motor is in fact low on oil or the oil pressure sending unit (https://www.yourmechanic.com/services/oil-pressure-sensor-replacement) is not working properly and may be producing a faulty reading....
How to change the dashboard information language on a 2007 saturn aura
I would recommend looking in your vehicle's owner's manual for this particular information. This is not something that would be the same on all or even many vehicles. Each vehicle will have a specific way for doing something like this....

Related articles

What to Do If Your Car Switches Get Wet
Your car switches are electrical components. They operate internal and external vehicle functions that require low currents in some cases...
How Long Does a Cylinder Head Temperature Sensor Last?
The The engine’s performance is largely based on temperature measurements performed by the engine control module (ECM), also known as the vehicle’s computer. As the temperature of the engine increases, the resistance decreases which means the voltage drops. The computer...
How to Replace an Ignition Lock Assembly
An ignition lock assembly can fail from constant use or broken keys inside the tumbler. To replace it, all you need are some tools and a new cylinder.