Q: Car goes into gear but won't move. Oil leak after hitting dip

asked by on February 12, 2016

The tires won't turn. My car starts and goes into gear, but it won't move.

If the tires won’t turn, but the car will go into gear, I would first check that the parking brake is not enabled, keeping the vehicle from moving. If that is not the case, I would then recommend having a professional technician, such as one from YourMechanic, inspect your vehicle and determine why your car is not able to move.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

Where are the jack and the emergency tools located?
All of the emergency tools, and the jack, are located under the front passenger seat. To access the emergency tools, use your hands to remove the plastic cover at the base of the passenger seat. Then, pull out the jack...
Battery light on and now car won't start
From what you've described, it sounds like a belt broke. All of those systems are belt-driven. A visual inspection would easily confirm this. Don't try to start your engine, as overheating is the main risk for your engine now. I'd...
Check engine light on & oil pressure dropped
Hello. It is possible that you are getting a false reading as a result of a faulty oil pressure switch. It is also possible that there is an oil leak and that’s what is causing the oil pressure to drop....
low washer fluid warning light and blind spot indicator off
Hello there, you are correct. The washer fluid level and the blind spot indicator systems are related. The system shuts off when either the trunk is open or the washer fluid is low. If you have filled the washer fluid...
Overfilled oil
I would recommend taking the vehicle back to the service facility that changed your oil and giving them a chance to resolve the issue. This service should no doubt be free of charge since it was no fault of yours...
Air conditioner not working after a battery change
Hello. Thank you for writing in. At first, disconnect the battery and verify that all of the wires in the starting system and charging system are clean, dry, and tight. Make sure the battery cables are corrosion free, and have...
White smoke coming from A/C coolant is low?
If you are referring to "smoke" coming from the dash vents when the a/c system is running, that is simply water vapor. The refrigerant is contained in a sealed system, although not quite as well sealed as a home or...
I went to a mechanic today after my check engine light came on! I think the code said either p1034 or p1035 are they same?
The two codes are not the same but do pertain to the same oxygen sensor in the exhaust one is for the signal and the other for the heater circuit not within specifications. Since the code was cleared then you...

Related articles

How Can I Tell If My Clutch Is Slipping?
For some drivers, shifting a manual transmission is second nature. Others prefer to rely on automatic transmissions. Drivers of automatic vehicles don’t have...
A Buyer’s Guide to the 2013 Chevrolet Spark
The The Chevy Spark nimbly walks the line between being functional and being totally adorable. In the spirit of mini cars past like the Ford Festiva and the Yugo, this spritely little creation offers improved safety combined with the tech...
Symptoms of a Bad or Failing Universal Joint (U-Joint)
Common signs of a faulty u-joint include a squeaking noise, clunking sound when shifting, vibrations in the car, and transmission fluid leaking.