Q: Cannot get trunk open after using Valet mode

asked by on May 17, 2016

I was demonstrating the Valet feature of my car's trunk this weekend, and then after I closed the trunk, the key will not open the trunk. I can insert the key into the lock, but when I try using it, it does not budge. I don't want to force it because that could break the key off into the lock. I tried both of my keys and neither of them worked. I tried the keys in the other locks, the driver's door and glove box, and it worked fine. How can I get into the trunk, since the seat release is located in the trunk?

If your vehicle has a valet switch, it should be located on the interior of the vehicle. This switch is often times hidden in the glove compartment somewhere. Whichever button you pressed to activate the valet feature is the same button that should be pressed to deactivate it. On some systems, with the valet system engaged, the key will not open the trunk by design. This feature is intended to prevent valet drivers from being able to access your trunk and possibly steal your valuable items.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

Car alarm keeps going off in 2000 Range Rover
Range Rovers have an emergency key access procedure to disarm the alarm with the mechanical key if the remote fails to do so. It requires that a 4-code key be entered into the vehicle by turning the key in the...
MAP sensor
Hello. MAP stands for manifold absolute pressure. So the answer to your question would be that it is the manifold absolute pressure sensor that there is something wrong with. The map sensor reads the pressure in the manifold and sends...
grinding noise when braking in cold temps and shifting is difficult
What you are feeling sounds like normal anti-lock brake (ABS) operation. The ABS system is designed to prevent the wheel lockup when the brakes are applied firmly or is on a slippery surface. To accomplish this, the ABS module monitors...
Grinding noise while braking - 2006 Porsche Cayenne
Okay, so with brakes, the concept is fairly simple and hasn't changed much over the years. You have a rotating disk and it is being squeezed on both sides by a pair of pads. If you are hearing a grinding...
Replaced a fuel module but the fuel gauge still reads empty when I know I have a full tank.
This may be related to the fuel sending unit in the fuel tank. Your fuel tank has a float type unit that sits inside of it which monitors the fuel level in the tank and transmits this information to the...
Why would me 2002 Honda CR-V make a squealing noise when hitting the gas
Hello. This noise can come from a few different things. You are right that most of the time it is caused by a failing or loose belt. If the belt is loose then it may be the tensioner that is...
Is it mechanically safe to coast in neutral?
Technically, least cost operation is attained if engine idling (at stops) does not exceed 60 seconds and, indeed, some studies put the threshold as low as 10 seconds. Certainly 60 seconds is a conservative estimate. This is why "start-stop" features...
My 2010 Mercury Mariner makes a rattling sound when accelerating
The noise you are hearing is most commonly known as pinging or pre-ignition. This can be causes by the mass air flow sensor running the engine lean or if you do not have a flex fuel vehicle then running a...
Car stays stuck in reverse
You will need to check both ends of your shifter cable to see if the shift cable bushings are worn out and need to be replaced? If they are worn out then replace bushings and or cable.

Related articles

A Buyer’s Guide to the 2012 Kia Soul
Known Known to a lot of people as “the hamster car” thanks to its funny and catchy TV ad campaign when it first debuted, the 2012 Kia Soul has gained a lot of popularity over the last few years. Some...
A Buyer's Guide to the 2012 Mazda 2
For For those of you who really just want a car for the sake of transportation—and not towing or for a job where you need to transport tools—you might want to consider the 2012 Mazda 2. This car may not...
2012 Ford Focus vs. 2012 Mazda 3: Which One Should I Buy?
Compact sedans and hatchbacks provide a great ride on a budget, with the evolution from a stodgy, unattractive exterior (and interior!) to a more fully-featured trim set and exterior design. Driving enjoyment is improved throughout the class, which are known...