Q: After replacing the ECM in a 2002 Mercury Mountaineer what will be the reason for it not to fire or start
After replacing a ECM module my car will not fire or start what could be the issue
My car has 1010800 miles.
My car has an automatic transmission.
Recommended Services
| Car is not starting Inspection | $94.99 - $114.99 | Get a Quote |
On cars built after the late 1990’s, replacing an ECU is a much bigger deal than just plugging in a new box. The ECU has to recognize the serial number of the car and the other modules in the car. The reason for this is to prevent chop shops from stealing cars, taking them apart, and selling off the modules to the repair industry. Replacement modules whether new or used must be programmed with the VIN before they will operate. This requires specialized scanning equipment. To get this done, you can contact YourMechanic. They can send a technician to your home or office to check out your Mountaineer and let you know what it is going to take.
The statements expressed above are only for informational purposes and should be independently verified. Please see our
terms of service
for more details
Get an instant quote for your car
Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing
What others are asking
What happens if the battery in my electronic key gets low?
While your electronic key is definitely convenient, it is a battery-powered device. That means the battery will eventually run low and then die. You’ll need to replace it at that point, but how do you tell that the battery is...
How do I use the manual windows?
While most modern cars are equipped with power windows, many vehicles will have manual windows. To use, simply turn the hand crank on each door counterclockwise to lower and clockwise to raise the manual windows.
Grinding noise from differential
It sound like your differential may be failing. There are many bearings and gears in the differential that may be damaged. A technician can use a stethoscope to pinpoint where the noise is coming from and determine if it is...
Stuck in second gear
The vehicle speed sensor may be malfunctioning and causing the transmission not to shift. The computer will need to have the codes retrieved. I recommend that you have a mechanic, such as one from YourMechanic, come and test the vehicle...
I have a 2010 dodge nitro and the air is only blowing from the feet not the main vents
Thanks for writing in about your 2010 Dodge Nitro. From what you've described, you may have a bad air control blend door actuator that is bad. The actuator needs to be tested using a scanner first to check for this....
Hissing noises coming from the gas tank area
Hey there. From your description, it sounds like you are hearing the Evaporative emissions system perform its routine checks. The computer will check the fuel tank and evaporative emissions hoses for leaks. If conditions are right, the pressure will build...
Low RPM/ Won't Shift
Hello and thank you for contacting YourMechanic. It seems like the IAC (idle air control) valve is malfunctioning. Check the wiring to the IAC for any debris and any corrosion. If the wiring harness is in good shape, then I...
Fiero begins to overheat when at idle/ driving slow
This can be caused by a number of things such as low coolant levels, a faulty thermostat (https://www.yourmechanic.com/services/thermostat-replacement), or a failing coolant fan switch. As you may know the coolant fan switch (https://www.yourmechanic.com/services/cooling-fan-relay-replacement) helps to maintain the proper coolant temperature...
When accelerating my steering wheel shimmers, like a slight wobble only while accelerating
Failure of the outer CV joints would more likely cause audible clicking or clunking on turns and not vibration. And, if the rubber boots are intact on the driveshafts (especially on the outer CV joints), it is not likely there...
Related articles
How Your ECU Uses Sensor Data
Today’s Today’s modern vehicles are made up of anywhere from one to seven computers that assist with the car’s day to day functions. An engine control unit (https://www.yourmechanic.com/article/how-your-ecu-uses-sensor-data) (ECU), is a computer that similar to that of a laptop or...
Understanding the Mercury Intelligent Oil Life Monitor and Service Indicator Lights
Car symbols, or dashboard lights, are a car service reminder. The Mercury Intelligent Oil Life Monitor indicates when and what service your car needs.
Industry News for Automotive Techs: October 29 - November 4
Toyota and Getaround's smartphone key, future McLaren cars, DMCA car hacking, a fire at Ford's headquarters, and Chevrolet's SEMA 2016 show cars.
Browse other content
Maintenance
Cities