Q: after my car been running for a while it jolts like it don't want to stop

asked by on January 27, 2018

After driving for a while, when i come to stop i press on the break and it jolts like it don't want to stop and it get worse the more i drive on it.
My car has an automatic transmission.

Engine idle speed is high Inspection $94.99 - $114.99 Get a Quote

In the majority of vehicles, engine idle speed is controlled by an idle control valve (ICV). The ICV valve can fail or a faulty or blown fuse in other electronically controlled systems can cause the IAC motor to malfunction, leading to surging and a higher than normal engine idle speed. Failures in the ICV valve itself are often due to excessive carbon buildup in the intake manifold. Other possible causes of the "jolt" you are experiencing include vacuum leaks, a malfunctioning throttle and, rarely, a PCM/ECM malfunction. With regard to vacuum leaks, on a fuel injected engine a vacuum leak will cause a high engine idle as the engine’s oxygen sensor detect the extra oxygen entering the engine through the vacuum leak. The newly lean (too much air relative to fuel) status will result in the engine’s computer pumping in additional fuel, resulting in an abnormally high engine speed. A malfunctioning throttle system can cause both a high idle as well as an engine stall. A dirty air intake or cracked air intake tube is often the culprit. If you desire that this high idle problem be diagnosed by a certified Mechanic, dispatched by YourMechanic right to your location, please request an engine idle speed diagnostic - high idle and the responding certified mechanic will get this taken care of for you. If you have further questions or concerns, do not hesitate to re-contact YourMechanic as we are always here to help you.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

How do I open the hood?
It is very easy to open the hood: Pull on the hood release lever, which is located at the bottom left part of the dash, near the brake pedal. You should feel or hear the hood release. From the front...
Intake/throttle body
This problem will be very difficult to diagnose as the vehicle is not present. It seems the noise does change as the load on the engine changes. Worn wheel bearings (https://www.yourmechanic.com/services/wheel-bearings-replacement) or pulleys along the belt drive system can make...
My suv wont start. It shows DSC malfunction and 4x4 problems.
The DME relay is a dual relay that powers the fuel system. This relay is typically located in the fuse box located inside of the ECU compartment. There will be several locations in the vehicle that will house fuses and...
Transmission is slipping
Hello. From what you describe it would appear that your vehicle may be experiencing more than one issue. The trouble code you have listed appears to be for an issue with the vehicle's fuel pressure sensor or circuit. It may...
Shaking and wants to stall
Shaking or vibration (https://www.yourmechanic.com/services/engine-is-shaking-pulsating-or-vibrating-inspection) may be caused by many different things such as faulty spark plugs, poor fuel pressure or misfires. Other things such as a faulty idle air control valve (https://www.yourmechanic.com/services/idle-control-valve-replacement) may cause the engine idle to drop below...
I have a CLS550 I was driving on the Interstate and Suddenly my car gave me a message saying pull over stop driving car too low wh
Hi there. This error message typically comes on when there is a leak in the air suspension of the Mercedes-Benz CLS-550. If you'd like to have one of our mobile mechanics come to your location and complete a suspension inspection,...
2003 Hyundai santa fe, automatic, When in reverse, there is a loud grinding noise, what is the issue?
Hi there. Usually when a grinding noise is occurring while only in reverse, it's an indication of an inner reverse gear failure. It's also common for a CV joint or inner axle shaft to make this type of noise when...
Computer says crankshaft position sensor. Already changed it to a new one amd original and still check engine light on and have tr
Hi Gibran. This is a rather common problem. In most cases, when you have an error code trapped in the ECU, and a repair is made, there are two reasons why the light would continue to trigger. First, you have...
Low idle RPM.
Hey Scuba. Thanks for contacting us today. Most of the time, when the idle control valve has been replaced and throttle body cleaned, a low idle is typically caused by a small vacuum leak, restriction within the fuel injectors or...

Related articles

A Buyer’s Guide to the 2012 Nissan Altima
While While it may not be quite as modern and sporty looking as some other models, the 2012 Nissan Altima is still a huge contender in the mid-size sedan category. With both four- and six-cylinder options and a CVT (continuously...
The Best Used Cars to Buy If You're a Mobile Housekeeper
If If you are a mobile housekeeper, chances are that you are looking for a small, reliable used vehicle that offers good gas mileage and enough space to store your supplies. With that in mind, we present to you the...
The Best Used Cars to Buy If You’re an Electrician
As As an electrician, you have to haul around wiring, tools and equipment, and tons of supplies. You can’t get by with a small used car, or even a big one. What you probably need is a good used cargo...