Q: Accidentally hit key fob and ignition went off

asked by on August 19, 2016

I was entering a curve in the road and my hand accidentally hit the key fob. The ignition suddenly went off. I immediately and quickly stopped the car and shifted into Park. Then I proceeded to restart the engine. Both the check engine and airbag service lights came on and remained on. After taking my car to an auto shop, they replaced the ignition. However, the warning lights are still on. What needs to be done to get these warning lights to turn off?

Check Engine Light is on Inspection $94.99 - $114.99 Get a Quote

The vehicles computer must be scanned to see which trouble codes have come up then an experienced technician, like one from YourMechanic, must diagnose the actual problem in this case. The codes present may not have seemed to have anything to do with the switch per the previous repair shop so they didn’t dig into it. That’s my guess as to what happened.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

How do I adjust the rearview mirror when I am experiencing headlight glare?
There are two ways to adjust your rear view mirrors to combat headlight glare. If you have a standard rear view mirror, there will be a lever at the base of the mirror. During the day, this lever should face...
How do I read the fuel gauge?
The fuel gauge is located on your instrument panel, and displays how much fuel is left in your gas tank. When the fuel gauge displays that you are nearly out of fuel, then you should add gas to your tank...
Problems starting car
Hello. It sounds like the key or the ignition switch could be having contact issues. There are contacts inside the ignition switch. To eliminate a worn key resistor, try another key and see if you have the same result. If...
Fasteners for the hood came off
All of the fasteners for the hood are required as the mounting locations serve important roles in the event of a collision. While shifting gears, the weight transfer and flex of the vehicle may be causing this noise through a...
My car has a lack of power - 2001 Lincoln LS
This may be a sign of a dirty or faulty mass air flow sensor. The mass air flow sensor is a unit in the intake system that monitors air intake as it is mixed with fuel prior to being injected...
Lost trailer brakes & lighting due to improper installation
It is possible an independent mechanic may be able to devise a fix for the wiring issue (https://www.yourmechanic.com/services/electric-problems-inspection) that the dealer would be restricted from doing as it may require modifications. One thing to consider though, modifications to the truck...
My 1999 ford wind star came with a locked glovebox with no key. How do I get into the glovebox without damaging it?
Hello, thank you for writing in. If preventing damage, you have two different options. One is to order a new key from the dealership. The other is to have a professional locksmith pick the lock. These locks (https://www.yourmechanic.com/services/door-does-not-lock-or-open-inspection) are simple...
No start, no crank
Check to see if there are any stored diagnostic trouble codes. Be sure you have a fully, 100% charged battery that passes a load test (https://www.yourmechanic.com/services/battery-is-dead-inspection). Confirm that the engine immobilizer system (security system) is not activated thus preventing the...
Cylinder 4 misfire code P0304
You should recheck computer to see if same code is coming up P0304? If it is then check plug wire to see if it has oil on it from a leaking valve cover gasket getting oil on plug wire and...

Related articles

Is It Safe to Drive With the Air Bag Light On?
Follow these 6 tips to stay safe if your SRS, supplemental restraint system, or Air Bag light turns on.
P0765 OBD-II Trouble Code: Shift Solenoid D Malfunction
P0765 code means there was an abnormality detected within solenoid D often due too internal blockages or malfunctioning transmission parts.
P0788 OBD-II Trouble Code: Shift/Timing Solenoid High
P0788 means that the ECM has detected a high voltage from the timing solenoid valve (TCM) terminal due to low or dirty fluid, or shorted solenoid.