Volvo 240 Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(19)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(19)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Volvo 240 Control Arm Assembly Replacement is $246 with $106 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Volvo 240L4-2.3LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$510.18Shop/Dealer Price$602.58 - $871.66
1992 Volvo 240L4-2.3LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$415.39Shop/Dealer Price$470.70 - $630.88
1990 Volvo 240L4-2.3LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$559.57Shop/Dealer Price$650.96 - $919.30
1990 Volvo 240L4-2.3LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$415.39Shop/Dealer Price$470.74 - $630.94
1992 Volvo 240L4-2.3LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$415.39Shop/Dealer Price$472.80 - $634.55
1992 Volvo 240L4-2.3LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$624.69Shop/Dealer Price$746.36 - $1106.89
1990 Volvo 240L4-2.3LService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$501.17Shop/Dealer Price$591.84 - $859.63
1993 Volvo 240L4-2.3LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$415.39Shop/Dealer Price$470.74 - $630.94
Show example Volvo 240 Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volvo mechanics

Real customer reviews from Volvo owners like you.

Excellent Rating

(19)

Rating Summary
18
0
0
0
1
18
0
0
0
1

Tien

24 years of experience
903 reviews
Tien
24 years of experience
Volvo 240 L4-2.3L - Brakes, Steering and Suspension Inspection - Pleasanton, California
Excellent and prompt service as always! Diagnosed the problem quickly and determined that the power steering issue was a simple and much less costly fix rather than having to do significant repairs. Highly recommend!!

Nezar

27 years of experience
102 reviews
Nezar
27 years of experience
Volvo 240 L4-2.3L - Alternator Repair - Boca Raton, Florida
It was awesome. He showed up early was friendly and knowledgeable. He finished the job in a reasonable amount of time and showed me that the work had been completed.

Nicholas

22 years of experience
354 reviews
Nicholas
22 years of experience
Volvo 240 L4-2.3L - Brake Pads Replacement (Front) - Denver, Colorado
Arrived on time. Work was preformed efficiently and professionally..

Tien

24 years of experience
903 reviews
Tien
24 years of experience
Volvo 240 L4-2.3L - Brake Light Switch - Dublin, California
Tien took care of the repair very quickly! Definitely recommend.

Excellent Rating

(19)

Rating Summary
18
0
0
0
1
18
0
0
0
1
Number of Volvo 240 services completed
209+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volvo MECHANICS
600+
experts on our platform

Recent articles & questions

What Does Car Value Mean?
Knowing Knowing whether or not you’re getting a good car for your money is difficult because “good” is open to interpretation. You and a friend can have the same new car, yet have widely differing views of its value and...
Insurance Requirements for Car Registration in Pennsylvania
All All drivers in Pennsylvania are required to carry liability insurance, or “financial responsibility,” on their vehicles in order to operate a vehicle legally and to maintain legal vehicle registration. No-fault state Pennsylvania is a no-fault state, meaning that your...
B1979 OBD-II Trouble Code: Passenger Seat Rearward Switch Circuit Short to Battery
B1979 means there is an issue with the passenger seat rearward switch circuit error, likely due to damaged electrical components or a bad switch.

What does the electronic power steering light mean?

Your car does not have a conventional hydraulic power steering system. It’s equipped with an electronic power steering system (EPS). This system draws its power from the alternator and battery in the car, and does not require any fluid to...

Hey Chris what direction is the radiator cooling fan Supposed to blow? Towards the engine or towards the radiator ? It is a 201

The fan should blow air toward the engine (i.e., same direction as the air flow when the vehicle is in motion). If the fan is not OEM, the air volume may be off and the electrical characteristics could be different....

Car will not start new battery

You will need to have battery fully charged and then have charging system tested. If jump starting the car does not let the engine start then you may have a starter or theft system problem and would need further tests...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com