Volkswagen Golf SportWagen Brake Drum Replacement Costs

Estimate price near me

Service Location

Customer Ratings

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

Brake Drum Replacement Service

How much does a Brake Drum Replacement cost?

On average, the cost for a Volkswagen Golf SportWagen Brake Drum Replacement is $306 with $173 for parts and $133 for labor. Prices may vary depending on your location.

Car	Service	Estimate	Shop/Dealer Price
2015 Volkswagen Golf SportWagenL4-1.8L Turbo	Service typeBrake Drum Replacement	Estimate$516.05	Shop/Dealer Price$618.81 - $895.61
2019 Volkswagen Golf SportWagenL4-1.4L Turbo	Service typeBrake Drum Replacement	Estimate$557.50	Shop/Dealer Price$673.54 - $983.33
2018 Volkswagen Golf SportWagenL4-1.8L Turbo	Service typeBrake Drum Replacement	Estimate$557.50	Shop/Dealer Price$673.54 - $983.33
2017 Volkswagen Golf SportWagenL4-1.8L Turbo	Service typeBrake Drum Replacement	Estimate$529.01	Shop/Dealer Price$642.00 - $949.51
2015 Volkswagen Golf SportWagenL4-2.0L Turbo Diesel	Service typeBrake Drum Replacement	Estimate$478.03	Shop/Dealer Price$578.33 - $847.65
2016 Volkswagen Golf SportWagenL4-1.8L Turbo	Service typeBrake Drum Replacement	Estimate$488.05	Shop/Dealer Price$590.84 - $867.65
2019 Volkswagen Golf SportWagenL4-1.8L Turbo	Service typeBrake Drum Replacement	Estimate$566.00	Shop/Dealer Price$681.81 - $991.42

Show example Volkswagen Golf SportWagen Brake Drum Replacement prices

What are brake drums and how do they work?

A brake drum is a heavy, cast iron brake system part that looks like a shallow, several inches-high cylinder about 9 to 12 inches in diameter. The brake drum has a precisely machined surface all around the interior circumference, that the brake shoes make contact with when you apply the brakes, transmitting hydraulic pressure through the wheel cylinder. This forces the brake shoes outward against the interior of the brake drum, resulting in the friction that causes the car to slow. The brake drum is mounted over, and fully encloses, all of the rear brake components such as the wheel cylinder, springs and clips, brake shoes, and parking brake mechanism. The drum is commonly held to the wheel hub by the wheel and the lug nuts, but some configurations combine the drum with the wheel hub as one unit. Nowadays, a drum brake type system is only installed on the rear axle, if used at all, as 4 wheel disc type systems have become more common.

When to consider replacing brake drums:

Reduced braking effectiveness. If the brake drum is unevenly worn, scored or cracked, it will increase stopping distances. A cracked drum must be replaced outright but a worn drum can be restored on a brake lathe so long as enough metal material remains.
Pulsating brakes, pulling to one side, vibration or noise. If a brake drum is warped, is unevenly worn, or perhaps the brake shoes have worn down completely — creating metal-to-metal contact — you might detect pedal pulsation, the vehicle may pull to one side, or you might feel a vibration or hear a noise when you apply the brakes. The brake system will have to be inspected to pinpoint the exact problem.
Brake shoe replacement. Anytime the brake shoes are replaced, the drum must either be resurfaced or replaced outright. Installing new brake shoes on a used, unresurfaced drum will lead to poor results.
Loss of parking brake function. The parking brake locks the brake shoes against the brake drum. If the brake drum is cracked, the parking brake lever will pull up excessively and the car may still be able to roll. However, a more common circumstance is parking brake maladjustment or seizure of parking brake components. Repair of those problems will often require removal of the brake drum.

How do mechanics replace brake drums?

There are two options when it comes to brake drum service: outright replacement or resurfacing. In some cases, it is cheaper to replace the drum rather than refurbish it. In both cases though, the removal and installation procedure for the drum is the same.

Raise the vehicle and safely support it using steel jack stands.
Remove tire and wheel assembly.
Remove brake drum. Sometimes the brake drum has rusted to the wheel hub and removal of the drum will require a brake drum puller. In some cases, the wheel hub is integral to the brake drum, in which case the hub-bearing retaining bolt and the wheel bearing must be removed to replace the drum.
Measure the interior diameter of the machined surface in the drum with a brake drum micrometer or similar measuring tool. If sufficient metal exists to resurface the drum on a brake lathe, the mechanic will compare the cost of such restoration to the alternative: buying a new drum.
Prior to installing the resurfaced or new drum, the brake shoes, springs, wheel cylinder, parking brake mechanism, and backing plate are all inspected. All worn parts should be replaced. Generally, if drums have been replaced or resurfaced, new brake shoes should be installed. The worn shoes will cause irregular wear in the brake drum and reduce braking effectiveness.
The shoes are adjusted and the drum is installed. The wheel and tire assembly are installed and torqued in the proper sequence and the car is road tested to check the operation of the brakes.

Is it safe to drive with a brake drum problem?

No. Should there be a deficiency with the brake drums, stopping distances will not be as short as possible. In a panic stop, stopping just five or ten feet shorter could be the difference between no collision and a collision. Any deficiency in a vehicle’s braking system is a cause for concern and a potential safety issue. Have the brake drums inspected at your earliest convenience to determine if a problem exists and find out what must be done to fix it.

When replacing brake drums keep in mind:

With few exceptions, brake work on one end of an axle should be performed on both ends of the axle. Should a brake drum on one end of a front or rear axle be serviced, or brake shoes on one end are serviced, both sides of the axle should receive the same service. This helps to avoid problems, such as pulling, vibration, and so forth, once the vehicle is returned for use.
Brake drum systems use very powerful springs to keep the brake shoes in position. These springs are exposed to extreme heat. It is best practice to replace all springs whenever new shoes are installed. Should a spring unexpectedly break in the brake drum assembly, a mispositioned brake shoe could cause the brakes to grab and lock, which would pose a safety issue.
If the wheel hub and bearing are integral to the brake drum on your car, the mechanic may recommend replacement of the grease in the wheel bearings and inspection of the wheel bearings.
Since the arc of the brake shoes will not perfectly match with the arc of the drum when new, expect a bed-in period before maximum braking efficiency is achieved.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Meet some of our expert Volkswagen mechanics

Real customer reviews from Volkswagen owners like you.

Excellent Rating

(9)

Rating Summary

9

0

0

0

0

9

0

0

0

0

SEE REVIEWS NEAR ME

Chris

22 years of experience

2229 reviews

Chris

22 years of experience

by Paul

Volkswagen Golf SportWagen L4-2.0L Turbo Diesel - Oil Change - Lake Forest, California

As normal Chris provided outstanding service, Arrived on time and provided the service quickly and without issue.

Ryan

5 years of experience

42 reviews

Ryan

5 years of experience

by Ben

Volkswagen Golf SportWagen L4-1.8L Turbo - Oil/Fluid Leak - Phoenix, Arizona

Ryan was knowledgeable, polite, and was able to quickly diagnose my issue!

Torrieanto

12 years of experience

632 reviews

Request Torrieanto

Torrieanto

12 years of experience

Request Torrieanto

by Hugh

Volkswagen Golf SportWagen L4-1.8L Turbo - Headlight Lens Assembly Replacement (Driver Side) - St. Leo, Florida

Arrived on time and did the job without issue.

H

26 years of experience

828 reviews

H

26 years of experience

by Selvam

Volkswagen Golf SportWagen L4-1.8L Turbo - Oil Change - Sunnyvale, California

I'm very happy with the services provided by Honorio. He was very professional, friendly and diligent [my car required 5.7L oil and initially it was ordered only for 4.8 but Honorio got suspicious from the oil-level indicator and cross-verified against manuals and added one more later]. Tires were all equally treaded but Honorio still did rotation as ordered though few might not have rotated anyways as I was not around. Overall I'm completely satisfied and would recommend anyone to blindly reserve an appointment with Honorio.

Excellent Rating

(9)

Rating Summary

9

0

0

0

0

9

0

0

0

0

SEE REVIEWS NEAR ME

Recent articles & questions

5 Essential Things to Know About Your Car’s Antenna Cables and Masts

The The antenna on your vehicle allows you to listen to radio stations, and there are a number of different types of antenna cables and masts. Whether you want to listen to regular terrestrial radio or you prefer satellite radio,...

Is It Safe to Drive With the Overdrive Light On?

The overdrive (O/D) light on your dash can mean two very different things, depending on whether it is lighting up and staying on,...

The Traveler’s Guide to Driving in Malaysia

CraigBurrows / Shutterstock.com Malaysia is a popular destination for many tourists today. The country has amazing sights and attractions (https://www.tripadvisor.com/Attractions-g293951-Activities-Malaysia.html) that you will want to explore. You may want to check out the Ethnology Museum, or the...

Misfires and low oil pressure when stopping. 2002 GMC Savana 2500

Hey there, thanks for writing in about your 2002 GMC Savana. If you are getting misfiring, then you should have a Check Engine Light on. The light should be scanned to get the codes to see what cylinders are misfiring....

engine operating at reduced output

Hi Pat...you should request a check engine light diagnostic (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection) during which a certified mechanic will download and interpret any stored diagnostic trouble codes. If there are no stored codes, one strategy is to scope the engine, that is evaluate...

My 07 Lexus is350 started making a bad clicking or knocking noise this am, my friend has a pocket scanner the code is 7e8 and 7e9

Hi there. Unfortunately, the pocket scanner won't help us diagnose this clicking noise for you. In order to correctly diagnose this issue, a professional mobile mechanic would have to complete an OBD-II diagnostic test with a digital scanner that would...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com