Toyota Cressida Headlight Bulb Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(10)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(10)

Headlight Bulb Replacement Service

How much does a Headlight Bulb Replacement cost?

On average, the cost for a Toyota Cressida Headlight Bulb Replacement is $154 with $14 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Toyota CressidaL6-3.0LService typeHeadlight Bulb - Passenger Side Low Beam ReplacementEstimate$184.44Shop/Dealer Price$195.40 - $220.18
1990 Toyota CressidaL6-3.0LService typeHeadlight Bulb - Driver Side High Beam ReplacementEstimate$175.43Shop/Dealer Price$184.62 - $208.08
1991 Toyota CressidaL6-3.0LService typeHeadlight Bulb - Passenger Side High Beam ReplacementEstimate$175.43Shop/Dealer Price$184.65 - $208.12
1990 Toyota CressidaL6-3.0LService typeHeadlight Bulb - Passenger Side High Beam ReplacementEstimate$175.43Shop/Dealer Price$184.65 - $208.12
1990 Toyota CressidaL6-3.0LService typeHeadlight Bulb - Driver Side Low Beam ReplacementEstimate$175.43Shop/Dealer Price$186.12 - $210.70
1991 Toyota CressidaL6-3.0LService typeHeadlight Bulb - Driver Side High Beam ReplacementEstimate$175.43Shop/Dealer Price$184.79 - $208.37
1991 Toyota CressidaL6-3.0LService typeHeadlight Bulb - Driver Side Low Beam ReplacementEstimate$175.43Shop/Dealer Price$184.66 - $208.15
1992 Toyota CressidaL6-3.0LService typeHeadlight Bulb - Driver Side Low Beam ReplacementEstimate$175.43Shop/Dealer Price$184.65 - $208.12
Show example Toyota Cressida Headlight Bulb Replacement prices

What are headlight bulbs and how do they work?

Headlight bulbs are encased in a carefully designed housing that illuminates the roadways and makes your car visible to other drivers and pedestrians. They rely on the vehicle’s electrical system for power. There are many types of headlight bulbs in use today including sealed beams, halogen plug-in bulbs, LED (light emitting diode), and HID (high intensity discharge) bulbs. Some car models are sold with headlight options and a mechanic may rely on your car’s VIN to determine the type of headlight system in your vehicle.

All headlamps rely on reflectors in the lamp housing to focus the headlight bulbs. This allows the most useful pattern of light to be cast onto the roadway. Halogen bulbs have a gas that allows for additional light. HID bulbs use two electrodes within the bulb that charge the gas to produce the light. LED bulbs operate at a lower temperature and the light shown on the road tends to be lower than HID bulbs. All headlights are designed to provide a well lit driving path when natural sunlight is not enough.

When to replace headlight bulbs?

  • Bulb is blown out. All of the various headlight bulb types are replaced if the bulb itself has failed. This is the most common scenario.
  • Bulb has dimmed. Some bulb types, particularly halogen bulbs, will produce significantly less light output as the bulb filament ages from use. LED and HID lighting do not dim with age and thus are generally only serviced if the light source has failed.
  • Headlight circuit fails. Note that in some cases, the bulbs are not the underlying issue that leads to the need for replacements. Instead wiring to the bulb, terminal connections, bulb sockets, and system components could be the underlying problem.

How do mechanics replace headlight bulbs?

  • Halogen bulbs and sealed beams, which are generally modular plug in components, are accessible once the hood is raised.
  • The replacement procedure for LED and HID bulbs will depend on whether the light source itself is faulty or if it’s a component in the circuit. Removal procedures for sophisticated HID and LED systems vary by car model and mechanics follow the repair procedures in the factory service manual for your model.
  • For all bulb types, wiring and bulb sockets must be carefully inspected when replacing bulbs to ensure that the electrical connections are complete and secure.
  • Finally, the installed newly bulbs are turned on to ensure normal operation.

Is it safe to drive with a headlight problem?

Headlights must always be fully functional after dusk to drive safely. Should your car have a failed headlight and is driven only when there is adequate daylight, you can put off the repair until it is convenient. Working headlights are required by law in throughout the U.S. whenever the car is used on public roads from sunset to sunrise and in many other specified conditions as well, such as when it is raining or when visibility is reduced due to smoke, fog, or other factors.

When replacing headlights keep in mind:

  • If a bulb does not have a visible filament that can inspected and tested, a mechanic might first test to see if there is power to the bulb. This is most applicable if your car has LED or HID lighting, which can fail if electronics in the circuit is faulty.
  • Halogen lamps and sealed beams should be replaced in pairs so that illumination levels are equal on both sides of the car.
  • Plastic lenses on many headlights degrade over time. Should there not be any issues with the bulbs, these can be replaced to restore your vehicle’s lighting system to a like new condition.
  • The condition of bulb sockets, the ground connection, fuses, and all components of the headlight circuit are important to proper and reliable functioning of the headlights and a mechanic should consider those aspects.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Toyota mechanics

Real customer reviews from Toyota owners like you.

Excellent Rating

(10)

Rating Summary
9
1
0
0
0
9
1
0
0
0

Farnaz

21 years of experience
80 reviews
Farnaz
21 years of experience
Toyota Cressida L6-3.0L - Spark Plug Replacement - Irvine, California
Prompt arrival and excellent service!

Chet

42 years of experience
509 reviews
Chet
42 years of experience
Toyota Cressida L6-2.8L - Car is not starting - San Diego, California
Very knowledgeable

Diego

22 years of experience
564 reviews
Diego
22 years of experience
Toyota Cressida L6-3.0L - Timing Belt - Laveen, Arizona
Got it done.

Peter

29 years of experience
592 reviews
Peter
29 years of experience
Toyota Cressida L6-2.8L - Spark Plugs - Valencia, California
Peter did a wonderful job. He explained in detail what he was doing and answered all my questions clearly. He performed his work up and beyond what I was hoping for. I highly recommend Peter.

Excellent Rating

(10)

Rating Summary
9
1
0
0
0
9
1
0
0
0
Number of Toyota Cressida services completed
110+
services done by our mechanics
TOTAL NUMBER OF EXPERT Toyota MECHANICS
1700+
experts on our platform

Recent articles & questions

5 Comfortable Sports Cars Your Parents Won't Complain About Riding In
The most comfortable sports cars combine high performance with a smooth ride. Options include the Alpina B6, Audi S8 Plus, and Mercedes-AMG S65.
How Long Does an Emergency Parking Brake Shoe Last?
The The emergency parking brake shoe is an important component in your emergency parking brake system. This part will literally hold your vehicle in place once the emergency parking brake has been engaged. If your car has rear rotors, the...
How to Register a Car in Nebraska
If If you are planning a move to the great state of Nebraska, then you will need to make sure you have all of the information that you need to comply with the laws that they have there. Among the...

What is the code P0406 and P0128?

The code P0406 (https://www.yourmechanic.com/article/p0406-obd-ii-trouble-code-exhaust-gas-recirculation-sensor-a-circuit-high-by-spencer-clayton) is for the electronic gas recirculation valve high circuit input. Meaning the valves sensor is detecting a high voltage input. This can be due to carbon build up on the valve, a bad valve, or a...

Car won't blow any hot or cold air

This may be related to a faulty blower motor or blower motor relay. The blower motor is a unit inside your vent system that blows warm air from the heater core to the vents when the heater is on or...

My power steering rack needs replacing. The part will cost me $989.98 plus the labor $460.00. Is those price fare?

Ouch! that's a pretty hard hit! unfortunately it may not be out of line. I'm curious about your warranty, however. Many new cars are covered by at least a 5 year / 50,000 mile warranty. If the rack was not...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com