Saturn LW2 Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(4)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(4)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Saturn LW2 Fuel Injector Replacement is $2111 with $1859 for parts and $252 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2000 Saturn LW2V6-3.0LService typeFuel Injector ReplacementEstimate$3997.90Shop/Dealer Price$4934.11 - $7728.14
Show example Saturn LW2 Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Saturn mechanics

Real customer reviews from Saturn owners like you.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0

Jose

26 years of experience
64 reviews
Jose
26 years of experience
Saturn LW2 V6-3.0L - Oil Change - Vallejo, California
Good mechanic, really knows his business. Having him come to my home to fix and service my car is fantastic. I'll definitely will have him back for future service or repairs.

Johnathon

10 years of experience
171 reviews
Johnathon
10 years of experience
Saturn LW2 V6-3.0L - Spark Plugs - Fresno, California
On time...competent...very knowledgeable

Derrick

12 years of experience
184 reviews
Derrick
12 years of experience
Saturn LW2 V6-3.0L - Serpentine/Drive Belt - Vallejo, California
Absolutly professional and. Efficient. Mobile Mechanics will always be my first choice in getting the job done. Thank you!

H

27 years of experience
828 reviews
H
27 years of experience
Saturn LW2 V6-3.0L - Car is making a noise - Menlo Park, California
Honorio arrived super on time, 1 min before my appointment! He is knowledgeable and patient enough to explain all the issues to me. I got quote for several services (timing belt and stuff), and he told me some of the service other car shop told me was unnecessary. Very honest and friendly man, and I would definitely get his help again. Thank you very much!

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0
Number of Saturn LW2 services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Saturn MECHANICS
700+
experts on our platform

Recent articles & questions

P2794 OBD-II Trouble Code: Gear Shift Direction Circuit Low
P2794 means there is a problem with a gear shift or lever direction or position due to a worn transmission, an electrical issue or a bad sensor.
P0480 OBD-II Trouble Code: Cooling Fan 1 Control Circuit Malfunction
P0480 code definition P0480 is a general OBD2 trouble code that refers to the a malfunction within the cooling fan control circuit....
How to Use a Prius as a Generator
Being Being without electricity due to natural disaster or repair work being performed on electric lines in your region is at best an inconvenience and at worst life-threatening, especially when you depend on electricity for essentials like heat in the...

Engine light on, loss of power. Lifted hood whilst engine running but fan doesn't seem to be spinning? Could this be the problem

The Check Engine Light indicates a problem in one of the vehicle systems. The stored trouble codes need to be tested and diagnosed. The electric fan should only come on when it's needed, if it is not necessary the fan...

P0328 code - 2008 Hyundai Accent

Hello. P0328 (https://www.yourmechanic.com/article/p0328-obd-ii-trouble-code-knock-sensor-1-circuit-high-input-by-spencer-clayton) is the code for a knock sensor. If the knock sensor fails, or there is an issue with the wiring, the code may be set off. You also mention that the Check Engine Light was not on....

Car got hot and lost all spark,it turns over but thats it.

There may be a couple of possibilities at play here. The overheating issue (https://www.yourmechanic.com/services/car-is-overheating-inspection) may be related to a faulty thermostat (https://www.yourmechanic.com/services/thermostat-replacement), coolant temp sensor (https://www.yourmechanic.com/services/coolant-temperature-switch-sensor-replacement) relay or potentially a blown head gasket. This can cause the car to run...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com