Saturn L200 Mass Airflow Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(65)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(65)

Mass Airflow Sensor Replacement Service

How much does a Mass Airflow Sensor Replacement cost?

On average, the cost for a Saturn L200 Mass Airflow Sensor Replacement is $237 with $142 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2002 Saturn L200L4-2.2LService typeMass Airflow Sensor ReplacementEstimate$399.35Shop/Dealer Price$480.44 - $701.21
2001 Saturn L200L4-2.2LService typeMass Airflow Sensor ReplacementEstimate$379.35Shop/Dealer Price$460.46 - $681.24
2003 Saturn L200L4-2.2LService typeMass Airflow Sensor ReplacementEstimate$379.35Shop/Dealer Price$460.46 - $681.24
Show example Saturn L200 Mass Airflow Sensor Replacement prices

What is the Mass Airflow Sensor all about?

The mass airflow sensor is a round tunnel made of plastic with a sensor attached inside. All cars take air from the outside and pass it into the engine through the air filter. The mass airflow sensor measures the amount of air entering the engine. For an engine to perform properly, it needs a specific amount of air-fuel mixture. The computer in the car reads the amount of air coming into the engine from the mass airflow sensor and then calculates the correct amount of fuel needed for proper engine performance. If the sensor goes bad, the engine will not know the right amount of fuel to add, causing problems including poor gas mileage, lack of power and more.

It is common for the mass airflow sensor to get dirty (if the air filter is dirty) and lose the ability to read the amount of air coming in the engine. If the vacuum hoses are leaking, it will give the same error code as mass airflow sensor failure.

When doing this job, the mechanic may recommend changing the electrical connector that connects the mass airflow sensor to the car's computer system. It is possible for the wires in the connector to break, causing the mass airflow sensor to not work.

Keep in mind:

  • Routinely changing your air filter can improve the lifespan of your mass airflow sensor
  • Often mass airflow sensors stop working because of bad connectors or wiring harnesses.
  • Anytime the mass airflow sensor is replaced, the air duct between the sensor and the intake manifold should be inspected.

How it's done:

  • Scan the computer in the car for codes.
  • Verify the problem.
  • Remove and replace the sensor if found faulty.
  • Check vacuum hoses for leaks and cracks.
  • Test drive the vehicle.

Our recommendation:

  • Changing the air filter on a regular basis will ensure that the car is getting cleaner air and hence performing optimally.
  • If the Check Engine light is on, get the car inspected as soon as you can.
  • If the Check Engine light is flashing, pull over and get the car towed to avoid costly repairs.
  • A mechanic should always inspect the vacuum hoses and snorkel attached to the mass airflow sensor when replacing it. It is possible for these items to have leaks. Replacing the sensor without fixing the leaks will not solve the problem.

What common symptoms indicate you may need to replace the Mass Airflow Sensor?

  • Check Engine light is on.
  • Car does not have power.
  • Excessive fuel consumption.
  • Car may not start.

How important is this service?

In order to run optimally, your vehicle needs to have a perfect fuel-to-air ratio. As the vehicle is moving, an uncontrollable amount of air enters the throttle body and heads into the intake manifold. As such, the fuel has to be adjusted to be optimal for the amount of air. The mass airflow sensor measures the mass of the air that is entering the vehicle, and sends the information to the car’s computer management system. This system then controls the amount of fuel that is injected into the cylinders, so that the ideal fuel-to-air ratio is achieved. When the mass airflow sensor stops working, the computer cannot receive information on the air intake, and the fuel-to-air ratio will be wrong. This will cause your engine to run poorly, and sometimes not at all. It will also impact your gas mileage.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Saturn mechanics

Real customer reviews from Saturn owners like you.

Excellent Rating

(65)

Rating Summary
58
3
1
1
2
58
3
1
1
2

Chris

20 years of experience
448 reviews
Chris
20 years of experience
Saturn L200 L4-2.2L - Serpentine/Drive Belt - Portland, Oregon
Convenient & fast

Matthew

12 years of experience
183 reviews
Matthew
12 years of experience
Saturn L200 L4-2.2L - Brakes, Steering and Suspension System - Indianapolis, Indiana
He was on time, and figured out my problem in minutes. Was polite, professional, and a good listener. GOOD MECH! :-)

Joseph

17 years of experience
97 reviews
Joseph
17 years of experience
Saturn L200 L4-2.2L - Car is not starting Inspection - Summerville, South Carolina
He was great but the estimate was outrageous. Just going to get another car. Only paid 1200.00 for that one.

Matthew

33 years of experience
1279 reviews
Matthew
33 years of experience
Saturn L200 L4-2.2L - Serpentine/Drive Belt - Hampton, Virginia
Matthew is very personable. I am sure he brings many repeat customers.

Excellent Rating

(65)

Rating Summary
58
3
1
1
2
58
3
1
1
2
Number of Saturn L200 services completed
715+
services done by our mechanics
TOTAL NUMBER OF EXPERT Saturn MECHANICS
700+
experts on our platform

Recent articles & questions

How to Buy a Good Quality Speedometer Sensor
Modern Modern vehicles are great: they offer so many advanced features to help keep you safe on the road. The speedometer sensor is one of those great inventions – created to help you keep to a safe speed and not...
How Long Does a Refrigerant Pressure Sensor (Switch) Last?
Your Your car’s air conditioning system helps keep you and your passengers cool and comfortable during hot weather. It also plays a role in operating the front defroster. In order to operate properly, the system needs a refrigerant – just...
How to Replace a Coolant Temperature Sensor
The coolant temperature sensor switch is not working if the engine emits black smoke. The switch may have failed if the car gets poor fuel economy.

Getting 2 then 4 abs codes, brake shutters, speedo dies and engine slowes when Brake and absolutely lights come on,

You definitely want to start by inspecting the front and rear wheel speed sensors; a failure in these circuits will result in several other problems. Begin by connecting a scanner to see if the Powertrain Control Module (PCM) is registering...

Where is the Coolant Temperature Sensor located?

Coolant temperature sensor is located at the upper radiator hose where it connects to the engine. Should be a green plug connector just to the left of the hose.

When the car hits 40 mph it feels like it wants to stall and slow down.

This is a sign of a potentially failing or dirty mass air flow sensor (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement). This is a unit that regulates the air intake into your engine and ensures that proper air/fuel mix is injected into the engine. When this...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com