Ram 2500 Throttle/Accelerator Pedal Position Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(70)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(70)

Throttle/Accelerator Pedal Position Sensor Replacement Service

How much does a Throttle/Accelerator Pedal Position Sensor Replacement cost?

On average, the cost for a Ram 2500 Throttle/Accelerator Pedal Position Sensor Replacement is $446 with $300 for parts and $146 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2014 Ram 2500L6-6.7L Turbo DieselService typeThrottle/Accelerator Pedal Position Sensor ReplacementEstimate$774.95Shop/Dealer Price$920.44 - $1367.04
Show example Ram 2500 Throttle/Accelerator Pedal Position Sensor Replacement prices

What is the Throttle/Accelerator Pedal Position Sensor all about?

On older vehicle designs, a simple throttle cable connects the accelerator pedal to the engine and controls the amount of fuel delivered to the engine. However, with fuel injected systems, that has changed. Newer engines now use electronics to control the amount of fuel sent to the engine based on accelerator pedal movement. This is the job of the accelerator pedal position sensor. It’s mounted to the gas pedal, and essentially translates the movement of the pedal (speed and position) into voltage, which tells the car’s computer how much fuel to supply for engine acceleration.

Keep in mind:

  • It’s impossible to check the operation of the accelerator pedal position sensor visually as it requires a voltmeter and an understanding of the proper voltage output range.
  • It’s possible for an accelerator pedal position sensor to operate intermittently.
  • A discrepancy in voltage will put the computer into “limp” mode, which provides significantly reduced power to prevent damage.

How it's done:

  • The throttle pedal position sensor is verified that it needs to be replaced. The throttle trim cover is then removed to access the sensor .
  • The defective throttle pedal position sensor is disconnected and removed.

  • The new throttle pedal position sensor is installed onto the firewall and reconnected.

  • The engine is started and the throttle pedal position sensor is tested for operation. The trim panel is then reinstalled.

  • The vehicle is road tested to ensure proper operation of the throttle pedal position sensor.

Our recommendation:

There is no set service or replacement period for your accelerator pedal position sensor. If you suspect a problem with your accelerator pedal position sensor, have one of our expert mechanics diagnose the system.

What common symptoms indicate you may need to replace the Throttle/Accelerator Pedal Position Sensor?

  • Lagging or intermittent acceleration
  • No acceleration
  • Limited power (limp mode)
  • No throttle response in Park or Neutral

How important is this service?

Because the accelerator pedal position sensor tells the car’s computer how quickly you’re depressing the accelerator pedal and controls the supply of fuel to the engine, replacement is very important. While your car will continue to operate even if there is a problem with the sensor, it will do so with limited capacity. Our experienced mechanics will use a voltmeter to determine sensor operation and diagnose the problem accurately. Have a faulty accelerator pedal position sensor replaced immediately.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ram mechanics

Real customer reviews from Ram owners like you.

Excellent Rating

(70)

Rating Summary
66
2
0
0
2
66
2
0
0
2

Gustavo

16 years of experience
103 reviews
Gustavo
16 years of experience
Ram 2500 V8-5.7L - Headlight Bulb Replacement (Driver Side Low Beam, Passenger Side Low Beam) - Secaucus, New Jersey
Pro Mechanic!

Gregory

32 years of experience
400 reviews
Gregory
32 years of experience
Ram 2500 L6-6.7L Turbo Diesel - Shock Absorber Replacement (Front) - Denver, Colorado
Great job, good experience.

Adam

30 years of experience
95 reviews
Adam
30 years of experience
Ram 2500 L6-6.7L Turbo Diesel - Water Pump - San Antonio, Texas
VERY PROFESSIONAL AND FRIENDLY

Jeff

34 years of experience
441 reviews
Jeff
34 years of experience
Ram 2500 L6-6.7L Turbo Diesel - Brake Pads Replacement (Front) - Roseville, California
Jeff was very good. Honest. I did not actually need new brake pads so he cancelled the service instead of doing it anyway and charging me unnecessarily. This is the second time I have had Jeff work on my truck and I will definitely use his help again.

Excellent Rating

(70)

Rating Summary
66
2
0
0
2
66
2
0
0
2
Number of Ram 2500 services completed
770+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ram MECHANICS
300+
experts on our platform

Recent articles & questions

How to Replace an Ambient Temperature Sensor
The ambient temperature sensor monitors the car's temperature inside and out. This sensor allows the AC to maintain comfortable cabin temperatures.
How Do Sensors Get Dirty or Damaged?
Car sensors measure and relay vital information to the ECU. Some sensors can get dirty from normal use, or fail if the car overheats or has a problem.
How Long Does a Low Oil Level Sensor Last?
Having Having the right amount of oil in an engine is important to the smooth running of your engine. In order for the engine on a car to run as intended, it will have to have the right amount of...

My 93 Ford Explorer hesitates when opening the throttle, it is very sluggish and acts like it has no power. Then all of a sudden i

You are correct to suspect the MAF with this sort of symptom. The MAF detects the the amount of air entering the motor. If there is a vacuum leak, or more common, if the air boot that connects the MAF...

Check Engine Light is on with the P0451 code

Hi there: Unplugging the fuel tank pressure system would unleash an entirely different set of problems - mainly the truck wouldn't start. This error code typically indicates that the EVAP vent solenoid (https://www.yourmechanic.com/services/evaporation-vent-solenoid-replacement) is damaged or faulty, which creates excess...

Gday Chet. My Subaru Liberty has been not starting randomly . Turns over but won't start 1998 Subaru Liberty

Hi there - your instincts are good! I suspect a failing crankshaft position sensor (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-crankshaft-position-sensor) as well. When they fail, there is often no Check Engine indicator. Checking for spark at the plugs during a "no start" event would be...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com